5305-00-170-2954, SCREW,EXTERNALLY RELIEVED BODY

National Stock Number:
5305-00-170-2954

Federal Supply Class:
5305

National Item Identification Number:
001702954

Description:
SCREW,EXTERNALLY RELIEVED BODY

Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is No. 0 (0.060 IN.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below No. 10 (0.190 IN.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also BOLT, EXTERNALLY RELIEVED BODY and BOLT, INTERNAL WRENCHING.

Manufacturer Information:

CA2760-53

29372

HOWMET GLOBAL FASTENING SYSTEMS INC.

Techincal Specification:

THREAD SERIES DESIGNATOR	UNF
NOMINAL THREAD DIAMETER	0.312 INCHES
THREAD QUANTITY PER INCH	24
THREAD CLASS	3A
THREAD DIRECTION	RIGHT-HAND
THREAD LENGTH	0.312 INCHES MINIMUM
FASTENER LENGTH	3.297 INCHES MINIMUM AND
	3.327 INCHES MAXIMUM
MATERIAL	STEEL COMP 440C OR
	STEEL COMP 631 OR
	STEEL COMP 302 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION	QQ-S-763 FED SPEC 1ST MATERIAL RESPONSE OR
	AMS 5673 ASSN STD 2ND MATERIAL RESPONSE OR
	QQ-W-423 FED SPEC 3RD MATERIAL RESPONSE OVERALL
SURFACE TREATMENT	PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
HEAD STYLE	FLAT COUNTERSUNK
HEAD DIAMETER	0.581 INCHES MINIMUM AND
	0.635 INCHES MAXIMUM
COUNTERSINK ANGLE	100.0 DEGREES NOMINAL
INTERNAL DRIVE STYLE	TORQUE
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY	1
FIRST DIAMETER FROM HEAD	0.310 INCHES MINIMUM AND
	0.312 INCHES MAXIMUM
SECOND DIAMETER FROM HEAD	0.250 INCHES NOMINAL
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER	2.625 INCHES NOMINAL
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF SECOND DIAMETER	3.000 INCHES NOMINAL
SPECIAL FEATURES	PLUNGER OPERATED SPRING LOADED RETAINING BALLS
THE MANUFACTURERS DATA
MANUFACTURERS CODE	29372
DESIGN CONTROL REFERENCE	CA2760-53

Click here to Register for Free 30-day Trial