| THREAD SERIES DESIGNATOR | UNRC |
| NOMINAL THREAD DIAMETER | 0.500 INCHES |
| THREAD QUANTITY PER INCH | 13 |
| THREAD CLASS | 3A |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LENGTH | 0.441 INCHES MINIMUM AND |
| 0.625 INCHES MAXIMUM |
| FASTENER LENGTH | 0.595 INCHES MINIMUM AND |
| 0.625 INCHES MAXIMUM |
| MATERIAL | STEEL COMP 302 OR |
| STEEL COMP 304 OR |
| STEEL COMP 305 OR |
| STEEL COMP 316 OR |
| STEEL COMP 384 OR |
| STEEL OVERALL |
| MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD 1ST MATERIAL RESPONSE OR |
| 66 FED STD 2ND MATERIAL RESPONSE OR |
| 66 FED STD 3RD MATERIAL RESPONSE OR |
| 66 FED STD 4TH MATERIAL RESPONSE OR |
| 66 FED STD 5TH MATERIAL RESPONSE OR |
| ASTM-A493 AISI XM-7 ASSN STD 6TH MATERIAL RESPONSE OVERALL |
| SURFACE TREATMENT | PASSIVATE OVERALL |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| HARDNESS RATING | 80.0 ROCKWELL B MINIMUM OVERALL |
| MINIMUM TENSILE STRENGTH | 80000 POUNDS PER SQUARE INCH |
| MINIMUM YIELD STRENGTH | 30000 POUNDS PER SQUARE INCH |
| HEAD STYLE | FLAT CHAMFER |
| HEAD DIAMETER | 0.735 INCHES MINIMUM AND |
| 0.750 INCHES MAXIMUM |
| HEAD HEIGHT | 0.492 INCHES MINIMUM AND |
| 0.500 INCHES MAXIMUM |
| INTERNAL DRIVE STYLE | HEXAGON |
| WIDTH ACROSS FLATS | 0.375 INCHES MINIMUM AND |
| 0.379 INCHES MAXIMUM |
| SPECIFICATION/STANDARD DATA | 80205-NAS1352 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | NAVY SPECIAL PROJECT |