|
|
|
National Stock Number:
5305-00-139-7008
Federal Supply Class:
5305
National Item Identification Number:
001397008
Description:
SCREW,EXTERNALLY RELIEVED BODY
Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is No. 0 (0.060 IN.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below No. 10 (0.190 IN.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also BOLT, EXTERNALLY RELIEVED BODY and BOLT, INTERNAL WRENCHING.
|
Manufacturer Information:
| SMB414745 | D9182 | ZF INDUSTRIEANTRIEBE WITTEN GMBH | | SMC413884-5 | 80063 | US ARMY COMMUNICATIONS & ELECTRONICS MATERIEL READINESS COMMAND LOGISTICS ENGINEERING DIR |
|
Techincal Specification:
| THREAD SERIES DESIGNATOR | UNC | | NOMINAL THREAD DIAMETER | 0.138 INCHES | | THREAD QUANTITY PER INCH | 32 | | THREAD CLASS | 2A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.277 INCHES MINIMUM AND | | 0.318 INCHES MAXIMUM | | FASTENER LENGTH | 0.657 INCHES MINIMUM AND | | 0.688 INCHES MAXIMUM | | MATERIAL | STEEL COMP 1010 OR | | STEEL COMP 1015 OR | | STEEL COMP 1016 OR | | STEEL COMP 1018 OR | | STEEL COMP 1019 OR | | STEEL COMP 1020 OR | | STEEL COMP 1022 OR | | STEEL COMP 1025 OR | | STEEL COMP 1026 OR | | STEEL COMP 1035 OR | | STEEL COMP 1040 OR | | STEEL COMP 1042 OR | | STEEL COMP 1045 OR | | STEEL COMP 1046 OR | | STEEL COMP 1548 OR | | STEEL COMP 1049 OR | | STEEL COMP 1050 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD ALL MATERIAL RESPONSES OVERALL | | SURFACE TREATMENT | CADMIUM AND | | CHROMATE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 2 CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | HEAD STYLE | FILLISTER | | HEAD DIAMETER | 0.208 INCHES MINIMUM AND | | 0.226 INCHES MAXIMUM | | HEAD HEIGHT | 0.089 INCHES MINIMUM AND | | 0.096 INCHES MAXIMUM | | INTERNAL DRIVE STYLE | SLOT | | EXTERNALLY RELIEVED BODY DIAMETER QUANTITY | 1 | | FIRST DIAMETER FROM HEAD | 0.089 INCHES MINIMUM AND | | 0.099 INCHES MAXIMUM | | DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER | 0.370 INCHES MINIMUM AND | | 0.380 INCHES MAXIMUM | | SPECIAL FEATURES | COLOR GOLD |
|
|