|
|
|
National Stock Number:
5305-00-138-0070
Federal Supply Class:
5305
National Item Identification Number:
001380070
Description:
SCREW,EXTERNALLY RELIEVED BODY
Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is No. 0 (0.060 IN.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below No. 10 (0.190 IN.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also BOLT, EXTERNALLY RELIEVED BODY and BOLT, INTERNAL WRENCHING.
|
Manufacturer Information:
| 135474-2 | 37695 | RAYTHEON COMPANY |
|
Techincal Specification:
| THREAD SERIES DESIGNATOR | UNC | | NOMINAL THREAD DIAMETER | 0.164 INCHES | | THREAD QUANTITY PER INCH | 32 | | THREAD CLASS | 2A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.380 INCHES MINIMUM | | FASTENER LENGTH | 1.930 INCHES MINIMUM AND | | 1.950 INCHES MAXIMUM | | MATERIAL | STEEL COMP 416 OR | | STEEL COMP 416F OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A582 ASSN STD 1ST MATERIAL RESPONSE OR | | SAE ASSN STD 2ND MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35,TYPE 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | HEAD STYLE | FLAT CHAMFER | | HEAD DIAMETER | 0.276 INCHES MINIMUM AND | | 0.286 INCHES MAXIMUM | | HEAD HEIGHT | 0.110 INCHES MINIMUM AND | | 0.130 INCHES MAXIMUM | | INTERNAL DRIVE STYLE | SLOT | | EXTERNALLY RELIEVED BODY DIAMETER QUANTITY | 1 | | FIRST DIAMETER FROM HEAD | 0.115 INCHES MINIMUM AND | | 0.125 INCHES MAXIMUM | | DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER | 1.550 INCHES MINIMUM AND | | 1.570 INCHES MAXIMUM | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 37695 | | DESIGN CONTROL REFERENCE | 135474-2 |
|
|