|
|
|
National Stock Number:
4820-01-240-9509
Federal Supply Class:
4820
National Item Identification Number:
012409509
Description:
VALVE,GLOBE
Detail:
A valve with one inlet and one outlet connection with outlet flow parallel to inlet flow. The flow is controlled by the action of a stem which lifts the disk perpendicularly off the center axis of its seat. The stem is at a 90 degree (1.5708 radians) angle to axis of flow. Excludes VALVE, STOP-CHECK; COCK, SHUTOFF, SCREW STEM; and VALVE, SOLENOID.
|
Manufacturer Information:
| 916251 | 0BR59 | SIEMENS GOVERNMENT TECHNOLOGIES, INC. | | 916251 | 82328 | DRESSER RAND CO TERRY CORP STEAM TURBINE MOTOR AND GENERATOR CO A JOINT VENTURE | | NC-4166-543 | 82328 | DRESSER RAND CO TERRY CORP STEAM TURBINE MOTOR AND GENERATOR CO A JOINT VENTURE | | 916251 | 830Q4 | CURTISS-WRIGHT ELECTRO-MECHANICAL CORPORATION | | 916251 | 8FGX3 | CURTISS-WRIGHT ELECTRO-MECHANICAL CORP |
|
Techincal Specification:
| MATERIAL | STEEL UNS K03504 BODY | | STEEL CORROSION RESISTING FLOW CONTROL DEVICE | | STYLE DESIGNATOR | STRAIGHT THRU W/OFFSET | | FLOW CONTROL DEVICE | DISK | | MEDIA FOR WHICH DESIGNED | OIL, LUBRICATING, DIESTER BASE SINGLE RESPONSE | | MAXIMUM OPERATING PRESSURE | 50.0 POUNDS PER SQUARE INCH SINGLE RESPONSE | | VALVE OPERATION METHOD | MANUAL | | CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END | | UNTHREADED INTERNAL TUBE 2ND END | | CONNECTION STYLE | FLARE(TUBE) 1ST END | | SOCKET 2ND END | | NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED | 0.375 INCHES 1ST END | | 0.500 INCHES 2ND END | | THREAD SERIES DESIGNATOR | UNF 1ST END | | NOMINAL THREAD SIZE | 0.562 INCHES 1ST END | | THREAD CLASS | 3B 1ST END | | THREAD DIRECTION | RIGHT-HAND 1ST END | | BONNET TYPE | OUTSIDE SCREW-YOKE | | BONNET ATTACHMENT METHOD | BOLTED |
|
|