|
|
|
National Stock Number:
4820-01-233-4771
Federal Supply Class:
4820
National Item Identification Number:
012334771
Description:
VALVE,GLOBE
Detail:
A valve with one inlet and one outlet connection with outlet flow parallel to inlet flow. The flow is controlled by the action of a stem which lifts the disk perpendicularly off the center axis of its seat. The stem is at a 90 degree (1.5708 radians) angle to axis of flow. Excludes VALVE, STOP-CHECK; COCK, SHUTOFF, SCREW STEM; and VALVE, SOLENOID.
|
Manufacturer Information:
| 2112F4E(MOD) | 28968 | CIRCOR INSTRUMENTATION TECHNOLOGIES, INC. | | 916215 | 0BR59 | SIEMENS GOVERNMENT TECHNOLOGIES, INC. | | 916215 | 82328 | DRESSER RAND CO TERRY CORP STEAM TURBINE MOTOR AND GENERATOR CO A JOINT VENTURE | | H-8205 | 82328 | DRESSER RAND CO TERRY CORP STEAM TURBINE MOTOR AND GENERATOR CO A JOINT VENTURE | | 916215 | 830Q4 | CURTISS-WRIGHT ELECTRO-MECHANICAL CORPORATION | | 916215 | 8FGX3 | CURTISS-WRIGHT ELECTRO-MECHANICAL CORP | | H-8205 ITEM 593 | 0BR59 | SIEMENS GOVERNMENT TECHNOLOGIES, INC. | | H-8205 ITEM 593 | 82328 | DRESSER RAND CO TERRY CORP STEAM TURBINE MOTOR AND GENERATOR CO A JOINT VENTURE | | NC-4166 | 82328 | DRESSER RAND CO TERRY CORP STEAM TURBINE MOTOR AND GENERATOR CO A JOINT VENTURE | | H-8205 ITEM 593 | 830Q4 | CURTISS-WRIGHT ELECTRO-MECHANICAL CORPORATION | | H-8205 ITEM 593 | 8FGX3 | CURTISS-WRIGHT ELECTRO-MECHANICAL CORP |
|
Techincal Specification:
| BONNET ATTACHMENT METHOD | THREADED | | BONNET TYPE | INSIDE SCREW | | CONNECTION STYLE | SOCKET (TUBE) 2ND END | | CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END | | CONNECTION STYLE | GASKET SEAL(BOSS) 1ST END | | CONNECTION TYPE | UNTHREADED INTERNAL TUBE 2ND END | | FLOW CONTROL DEVICE | STEM | | MATERIAL | STEEL BODY | | MATERIAL | STEEL CORROSION RESISTING FLOW CONTROL DEVICE | | MAXIMUM OPERATING TEMP | 450.0 FAHRENHEIT SINGLE RESPONSE | | MAXIMUM OPERATING PRESSURE | 5000.0 POUNDS PER SQUARE INCH SINGLE RESPONSE | | MEDIA FOR WHICH DESIGNED | OIL, HYDRAULIC SINGLE RESPONSE | | NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED | 0.375 INCHES 1ST END | | NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED | 0.375 INCHES 2ND END | | NOMINAL THREAD SIZE | 0.562 INCHES 1ST END | | SPECIAL FEATURES | MODIFICATION MADE IN END CONNECTIONS,FROM 1/4 IN. NPT FEMALE,TO 3/8 IN. SOCKET WELD BY 9/16-18 THD | | STYLE DESIGNATOR | STRAIGHT THRU | | THREAD CLASS | 2B 1ST END | | THREAD DIRECTION | RIGHT-HAND 1ST END | | THREAD SERIES DESIGNATOR | UNF 1ST END | | VALVE OPERATION METHOD | MANUAL |
|
|