|
|
|
National Stock Number:
4820-01-231-6991
Federal Supply Class:
4820
National Item Identification Number:
012316991
Description:
VALVE,GLOBE
Detail:
A valve with one inlet and one outlet connection with outlet flow parallel to inlet flow. The flow is controlled by the action of a stem which lifts the disk perpendicularly off the center axis of its seat. The stem is at a 90 degree (1.5708 radians) angle to axis of flow. Excludes VALVE, STOP-CHECK; COCK, SHUTOFF, SCREW STEM; and VALVE, SOLENOID.
|
Manufacturer Information:
| 10175-1 | 28968 | CIRCOR INSTRUMENTATION TECHNOLOGIES, INC. |
|
Techincal Specification:
| MATERIAL | STEEL COMP 316 BODY | | STEEL COMP 316 FLOW CONTROL DEVICE | | RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR PACKING | | STEEL COMP 316 STEM | | STYLE DESIGNATOR | STRAIGHT THRU | | FLOW CONTROL DEVICE | STEM | | MEDIA FOR WHICH DESIGNED | WATER-OIL-GAS SINGLE RESPONSE | | MAXIMUM OPERATING PRESSURE | 5000.0 POUNDS PER SQUARE INCH SINGLE RESPONSE | | VALVE OPERATION METHOD | MANUAL | | CONNECTION TYPE | THREADED EXTERNAL TUBE 1ST END | | THREADED INTERNAL BOSS 2ND END | | CONNECTION STYLE | FLARED (TUBE) 1ST END | | GASKET SEAL(BOSS) 2ND END | | SEAT ANGLE | 37.0 DEGREES 1ST END | | THREAD SERIES DESIGNATOR | UNF 1ST END | | UNF 2ND END | | NOMINAL THREAD SIZE | 0.250 INCHES 1ST END | | 0.250 INCHES 2ND END | | THREAD CLASS | 3A 1ST END | | 3B 2ND END | | THREAD DIRECTION | RIGHT-HAND 1ST END | | RIGHT-HAND 2ND END | | BONNET TYPE | INSIDE SCREW | | BONNET ATTACHMENT METHOD | BOLTED |
|
|