|
|
|
National Stock Number:
4820-01-229-9644
Federal Supply Class:
4820
National Item Identification Number:
012299644
Description:
VALVE,GLOBE
Detail:
A valve with one inlet and one outlet connection with outlet flow parallel to inlet flow. The flow is controlled by the action of a stem which lifts the disk perpendicularly off the center axis of its seat. The stem is at a 90 degree (1.5708 radians) angle to axis of flow. Excludes VALVE, STOP-CHECK; COCK, SHUTOFF, SCREW STEM; and VALVE, SOLENOID.
|
Manufacturer Information:
| 10107 | 28968 | CIRCOR INSTRUMENTATION TECHNOLOGIES, INC. | | 10107-2 | 28968 | CIRCOR INSTRUMENTATION TECHNOLOGIES, INC. | | 501-5563668 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 501-5563668 PC-4 | 53711 | NAVAL SEA SYSTEMS COMMAND |
|
Techincal Specification:
| MATERIAL | NICKEL ALLOY BODY | | COBALT ALLOY FLOW CONTROL DEVICE | | NICKEL ALLOY PACKING | | NICKEL ALLOY SEAT | | NICKEL ALLOY STEM | | STYLE DESIGNATOR | STRAIGHT THRU | | FLOW CONTROL DEVICE | NEEDLE | | MEDIA FOR WHICH DESIGNED | WATER-OIL-GAS SINGLE RESPONSE | | MAXIMUM OPERATING PRESSURE | 5000.0 POUNDS PER SQUARE INCH SINGLE RESPONSE | | MAXIMUM OPERATING TEMP | 70.0 DEG FAHRENHEIT SINGLE RESPONSE | | VALVE OPERATION METHOD | MANUAL | | CONNECTION TYPE | UNTHREADED INTERNAL TUBE 1ST END | | THREADED EXTERNAL BOSS 2ND END | | CONNECTION STYLE | SOCKET (TUBE) 1ST END | | EXTERNAL SEAT FOR GASKET SEAL (BOSS) 2ND END | | NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED | 0.250 INCHES 1ST END | | THREAD SERIES DESIGNATOR | UNF 2ND END | | NOMINAL THREAD SIZE | 0.433 INCHES 2ND END | | THREAD CLASS | 2A 2ND END | | THREAD DIRECTION | RIGHT-HAND 2ND END | | BONNET TYPE | INSIDE SCREW | | BONNET ATTACHMENT METHOD | THREADED |
|
|