|
|
|
National Stock Number:
4810-00-570-9195
Federal Supply Class:
4810
National Item Identification Number:
005709195
Description:
VALVE,BUTTERFLY
Detail:
A valve that controls flow by a circular disk, or a pair of semicircular disks, attached to a common spindle or lever turning on a diametral axis.
|
Manufacturer Information:
| 10-60495-4 | 81205 | THE BOEING COMPANY | | 321674-1-1 | 99193 | HONEYWELL INTERNATIONAL INC. | | 321674-3-1 | 59364 | HONEYWELL INTERNATIONAL INC. | | 321674-3-1 | 99193 | HONEYWELL INTERNATIONAL INC. | | 321674-4-1 | 99193 | HONEYWELL INTERNATIONAL INC. | | 321674-2-1 | 99193 | HONEYWELL INTERNATIONAL INC. |
|
Techincal Specification:
| CONNECTION TYPE | FLANGE FIRST END | | CURRENT RATING IN AMPS | 1.600 | | FACE TO FACE DISTANCE | 4.375 INCHES | | FLANGE FACE DESIGN | PLAIN FIRST END | | FLANGE SHAPE | ROUND FIRST END | | MATERIAL | ALUMINUM FLOW CONTROL DEVICE | | MATERIAL | STEEL BODY | | MATERIAL | STEEL BODY LINING | | MATERIAL | STEEL SEAT | | MATERIAL | STEEL STEM | | MOUNTING FACILITY | LUG(S) | | NOMINAL OUTSIDE DIAMETER | 5.061 INCHES FIRST END | | NOMINAL THICKNESS | 0.156 INCHES FIRST END | | OPERATING PRESSURE | 20.0 POUNDS PER SQUARE INCH (PSI) NOMINAL POWER DRIVE | | SPECIAL FEATURES | ONE EACH AIRESEARCH ROTARY ACTUATOR PART NO 541090-5-1 INSTALLED.O/A DIM,9.50 INCH LG BY 5.56 INCH W BY 6.75 INCH H | | VALVE OPERATION METHOD | ELECTRIC MOTOR | | VOLTAGE IN VOLTS AND CURRENT TYPE | 26.0 DC | | STYLE DESIGNATOR | STRAIGHT THRU | | SURFACE TREATMENT | PASSIVATE | | TEST DATA DOCUMENT | 81205-BAC10-60495-4 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). AND 99193-321674-3-1 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
|
|