| MATERIAL | STEEL CORROSION RESISTING BODY |
| STEEL CORROSION RESISTING FLOW CONTROL DEVICE |
| PLASTIC POLYAMIDE SEAT |
| STYLE DESIGNATOR | STRAIGHT THRU |
| FLOW CONTROL DEVICE | NEEDLE |
| MAXIMUM OPERATING PRESSURE | 3000.0 POUNDS PER SQUARE INCH SINGLE RESPONSE |
| MAXIMUM OPERATING TEMP | 180.0 DEG FAHRENHEIT SINGLE RESPONSE |
| VALVE OPERATION METHOD | SOLENOID |
| VOLTAGE IN VOLTS AND CURRENT TYPE | 115.0 AC |
| FREQUENCY IN HERTZ | 60.0 |
| PHASE | SINGLE |
| CURRENT RATING IN AMPS | 0.130 |
| FLOW CONTROL DEVICE NORMAL OPERATION POSITION | CLOSED |
| INLET/OUTLET OPERATING PRESSURE DIFFERENTIAL | 3000.0 POUNDS PER SQUARE INCH NOMINAL |
| CONNECTION TYPE | THREADED INTERNAL PIPE ALL ENDS |
| CONNECTION STYLE | PLAIN,OPTIONAL END(PIPE) ALL ENDS |
| NOMINAL PIPE SIZE ACCOMMODATED | 0.250 INCHES ALL ENDS |
| THREAD SERIES DESIGNATOR | NPT ALL ENDS |
| NOMINAL THREAD SIZE | 0.250 INCHES ALL ENDS |
| THREAD QUANTITY PER INCH | 18 ALL ENDS |
| THREAD DIRECTION | RIGHT-HAND ALL ENDS |
| APERTURE DIAMETER | 0.031 INCHES NOMINAL |
| MOUNTING POSITION | HORIZONTAL OR |
| VERTICAL |
| RENEWABLE SEAT RING TYPE | PRESSED-IN |
| REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS | AS DIFFERENTIATED BY THE ELECTRICAL REQUIREMENT |
| THE MANUFACTURERS DATA | |
| MANUFACTURERS CODE | 81978 |
| DESIGN CONTROL REFERENCE | 71216SN2BL00N0C111P3 |