| END CONNECTION DESIGN | ELBOW FIRST END |
| END CONNECTION DESIGN | ELBOW SECOND END |
| END FITTING COMPONENT AND MATERIAL | SWIVEL NUT STEEL COMP 304 FIRST END |
| END FITTING COMPONENT AND MATERIAL | SWIVEL NUT STEEL COMP 304 SECOND END |
| ANGLE BETWEEN RIGID ELBOW FITTINGS IN DEG | 180.0 |
| BURST TEST PRESSURE | 5000.0 POUNDS PER SQUARE INCH |
| CONNECTION TYPE | THREADED INTERNAL TUBE SECOND END |
| CONNECTION TYPE | THREADED INTERNAL TUBE FIRST END |
| CONNECTION STYLE | SWIVEL NUT FLARE FIRST END |
| CONNECTION STYLE | SWIVEL NUT FLARE SECOND END |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| HYDROSTATIC TEST PRESSURE | 2000.0 POUNDS PER SQUARE INCH |
| INSIDE DIAMETER | 0.630 INCHES MINIMUM |
| INSIDE SURFACE CONDITION | SMOOTH |
| OPERATING PRESSURE | 1000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED |
| OUTER COVERING ENVIRONMENTAL PROTECTION | CHEMICAL RESISTANT |
| OUTSIDE DIAMETER | 0.812 INCHES MAXIMUM |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | HOSE AND HOSE ASSEMBLY |
| MEASURING METHOD AND LENGTH | 20.375 INCHES NOMINAL WORKING |
| MEDIA FOR WHICH DESIGNED | HYDRAULIC HIGH PRESSURE SYSTEM AND PNEUMATIC HIGH PRESSUE SYSTEM SINGLE RESPONSE |
| MINIMUM INSIDE BENDING RADIUS | 6.50 INCHES |
| NOMINAL THREAD SIZE | 1.0625 INCHES FIRST END |
| NOMINAL THREAD SIZE | 1.0625 INCHES SECOND END |
| SPECIAL FEATURES | NAME OF EQUIPMENT RUDDER, MODEL AKAA0200 |
| TEMP RATING | -65.0 FAHRENHEIT AND 450.0 FAHRENHEIT SINGLE RESPONSE |
| THREAD CLASS | 3B FIRST END |
| THREAD CLASS | 3B SECOND END |
| THREAD DIRECTION | RIGHT-HAND FIRST END |
| THREAD DIRECTION | RIGHT-HAND SECOND END |
| THREAD QUANTITY PER INCH | 12 FIRST END |
| THREAD QUANTITY PER INCH | 12 SECOND END |
| THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) FIRST END |
| THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) SECOND END |