| END CONNECTION DESIGN | STRAIGHT FIRST END |
| BURST TEST PRESSURE | 1000.0 POUNDS PER SQUARE INCH |
| CONNECTION TYPE | THREADED INTERNAL TUBE FIRST END |
| CONNECTION STYLE | SWIVEL NUT FLARE FIRST END |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| INSIDE DIAMETER | 0.375 INCHES NOMINAL |
| INSIDE SURFACE CONDITION | SMOOTH |
| ITEM STRUCTURAL COMPOSITION | BRAIDED COTTON CORD OR BRAIDED FIBER OR WOVEN FABRIC FIRST LAYER |
| ITEM STRUCTURAL COMPOSITION | MOLDED RUBBER, CHLOROPRENE OUTER LAYER |
| OPERATING PRESSURE | 250.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED |
| OUTER COVERING ENVIRONMENTAL PROTECTION | FUEL RESISTANT AND OIL RESISTANT AND MILDEW RESISTANT AND VIBRATION RESISTANT |
| OUTSIDE DIAMETER | 0.594 INCHES MINIMUM AND 0.656 INCHES MAXIMUM |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | HOSE ASSEMBLY |
| MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| MEASURING METHOD AND LENGTH | 752.0 MILLIMETERS NOMINAL OVERALL |
| MINIMUM INSIDE BENDING RADIUS | 3.000 INCHES |
| SPECIAL FEATURES | INNER CONVEYING TUBE MATERIAL-RUBBER, SYNTHETIC; FITTINGS SHALL BE IAW SAE J516; BAND MARKER SHALL BE IAW MIL-E-43436; CLEAN BY BLOWING CLEAN DRY AIR THROUGH HOSE ASSEMBLY, THEN PLUG/CAP ALL ENDS PRIOR TO SHIPMENT |
| SPECIFICATION/STANDARD DATA | MIL-H-13444, TYPE 1 PROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION |
| THREAD CLASS | 2B FIRST END |
| THREAD DIRECTION | RIGHT-HAND FIRST END |