| END CONNECTION DESIGN | ELBOW FIRST END |
| BURST TEST PRESSURE | 12000.0 POUNDS PER SQUARE INCH |
| CONNECTION TYPE | THREADED INTERNAL TUBE FIRST END |
| CONNECTION STYLE | SWIVEL NUT, FLARELESS FIRST END |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| FLOW ANGLE | 45.0 DEGREES FIRST END |
| HYDROSTATIC TEST PRESSURE | 6000.0 POUNDS PER SQUARE INCH |
| INSIDE DIAMETER | 0.455 INCHES MINIMUM AND 0.485 INCHES MAXIMUM |
| INSIDE SURFACE CONDITION | SMOOTH |
| ITEM STRUCTURAL COMPOSITION | BRAIDED CORROSION RESISTANT STEEL WIRE OUTER LAYER |
| ITEM STRUCTURAL COMPOSITION | MOLDED POLYTETRAFLUOROETHYLENE FIRST LAYER |
| ITEM STRUCTURAL COMPOSITION | SPIRALLY WRAPPED CORROSION RESISTANT STEEL FABRIC FIFTH LAYER |
| ITEM STRUCTURAL COMPOSITION | SPIRALLY WRAPPED CORROSION RESISTANT STEEL FABRIC FOURTH LAYER |
| ITEM STRUCTURAL COMPOSITION | SPIRALLY WRAPPED CORROSION RESISTANT STEEL FABRIC SECOND LAYER |
| ITEM STRUCTURAL COMPOSITION | SPIRALLY WRAPPED CORROSION RESISTANT STEEL FABRIC THIRD LAYER |
| OPERATING PRESSURE | 3500.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED |
| OUTSIDE DIAMETER | 1.015 INCHES MINIMUM AND 1.406 INCHES MAXIMUM |
| MEASURING METHOD AND LENGTH | 24.000 INCHES NOMINAL OVERALL |
| MEDIA FOR WHICH DESIGNED | HYDRAULIC FLUID SINGLE RESPONSE |
| MINIMUM INSIDE BENDING RADIUS | 6.300 INCHES |
| NOMINAL THREAD SIZE | 0.875 INCHES FIRST END |
| SEAT ANGLE | 24.0 DEGREES FIRST END |
| SPECIAL FEATURES | END SWIVEL 180 DEGREES |
| WALL THICKNESS | 0.035 INCHES MINIMUM |
| TEMP RATING | -67.0 FAHRENHEIT AND 400.0 FAHRENHEIT SINGLE RESPONSE |
| THREAD CLASS | 3A FIRST END |
| THREAD DIRECTION | RIGHT-HAND FIRST END |
| THREAD QUANTITY PER INCH | 14 FIRST END |
| THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) FIRST END |