| END CONNECTION DESIGN | ELBOW SECOND END |
| END CONNECTION DESIGN | STRAIGHT FIRST END |
| END FITTING COMPONENT AND MATERIAL | COMPLETE FITTING STEEL ALL ENDS |
| END FLANGE CONSTRUCTION | SPLIT SECOND END |
| BOLT HOLE DIAMETER | 0.406 INCHES NOMINAL SECOND END |
| BOLT HOLE QUANTITY | 4 SECOND END |
| BURST TEST PRESSURE | 16000.0 POUNDS PER SQUARE INCH |
| CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 0.875 INCHES NOMINAL SECOND END |
| CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 2.000 INCHES NOMINAL SECOND END |
| CONNECTION TYPE | PLAIN FACE FLANGE SECOND END |
| CONNECTION TYPE | THREADED INTERNAL TUBE FIRST END |
| CONNECTION STYLE | PLAIN SWIVEL W/ GASKET GROOVE SECOND END |
| CONNECTION STYLE | SWIVEL NUT, INVERTED FLARE FIRST END |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| EXTERIOR COLOR | BLACK |
| FLANGE LENGTH | 2.550 INCHES NOMINAL SECOND END |
| FLANGE STYLE | DOUBLE OVAL (SAE SPLIT TYPE FLANGE) SECOND END |
| FLANGE WIDTH | 1.880 INCHES NOMINAL SECOND END |
| FLANGE THICKNESS | 0.750 INCHES NOMINAL SECOND END |
| FLOW ANGLE | 45.0 DEGREES SECOND END |
| HYDROSTATIC TEST PRESSURE | 8000.0 POUNDS PER SQUARE INCH |
| INSIDE DIAMETER | 0.750 INCHES NOMINAL |
| INSIDE SURFACE CONDITION | SMOOTH |
| ITEM STRUCTURAL COMPOSITION | MOLDED RUBBER FIRST LAYER |
| ITEM STRUCTURAL COMPOSITION | MOLDED RUBBER OUTER LAYER |
| ITEM STRUCTURAL COMPOSITION | SPIRALLY LAID STEEL WIRE THIRD LAYER |
| ITEM STRUCTURAL COMPOSITION | SPIRALLY LAID STEEL WIRE FIFTH LAYER |
| ITEM STRUCTURAL COMPOSITION | SPIRALLY LAID STEEL WIRE FOURTH LAYER |
| ITEM STRUCTURAL COMPOSITION | SPIRALLY LAID STEEL WIRE SECOND LAYER |
| OPERATING PRESSURE | 4000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED |
| OUTER COVERING ENVIRONMENTAL PROTECTION | WEATHERPROOF AND OIL RESISTANT AND OZONE RESISTANT |
| OUTSIDE DIAMETER | 1.210 INCHES NOMINAL |
| MEASURING METHOD AND LENGTH | 111.000 INCHES NOMINAL OVERALL |
| MEDIA FOR WHICH DESIGNED | HYDRAULIC FLUID SINGLE RESPONSE |
| MINIMUM INSIDE BENDING RADIUS | 9.500 INCHES |
| NOMINAL THREAD SIZE | 1.063 INCHES FIRST END |
| SEAT ANGLE | 37.0 DEGREES FIRST END |
| SPECIAL FEATURES | INNER CONVEYING TUBE MATERIAL-RUBBER, SYNTHETIC |
| TEMP RATING | -40.0 FAHRENHEIT AND 250.0 FAHRENHEIT SINGLE RESPONSE |
| THREAD CLASS | 3B FIRST END |
| THREAD DIRECTION | RIGHT-HAND FIRST END |
| THREAD QUANTITY PER INCH | 12 FIRST END |
| THREAD SERIES DESIGNATOR | UN FIRST END |