| END CONNECTION DESIGN | STRAIGHT FIRST END |
| END CONNECTION DESIGN | STRAIGHT SECOND END |
| BURST TEST PRESSURE | 11000.0 POUNDS PER SQUARE INCH |
| CONNECTION TYPE | THREADED INTERNAL TUBE SECOND END |
| CONNECTION TYPE | THREADED INTERNAL TUBE FIRST END |
| CONNECTION STYLE | SWIVEL NUT FLARE FIRST END |
| CONNECTION STYLE | SWIVEL NUT, GASKET SEAL SECOND END |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| EXTERIOR COLOR | BLUE |
| HYDROSTATIC TEST PRESSURE | 5500.0 POUNDS PER SQUARE INCH |
| INSIDE DIAMETER | 0.625 INCHES NOMINAL |
| INSIDE SURFACE CONDITION | SMOOTH |
| ITEM STRUCTURAL COMPOSITION | BRAIDED CORROSION RESISTANT STEEL WIRE FIRST LAYER |
| ITEM STRUCTURAL COMPOSITION | WRAPPED RUBBER, SYNTHETIC OUTER LAYER |
| OPERATING PRESSURE | 2750.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED |
| OUTER COVERING ENVIRONMENTAL PROTECTION | FIRE RESISTANT AND FUEL RESISTANT |
| OUTSIDE DIAMETER | 0.930 INCHES NOMINAL |
| MEASURING METHOD AND LENGTH | 35.000 INCHES NOMINAL OVERALL |
| MINIMUM INSIDE BENDING RADIUS | 6.000 INCHES |
| NOMINAL THREAD SIZE | 0.875 INCHES SECOND END |
| NOMINAL THREAD SIZE | 1.062 INCHES FIRST END |
| SEAT ANGLE | 37.0 DEGREES FIRST END |
| SPECIAL FEATURES | HYDRAULIC FLUID SHALL BE IN ACCORDANCE WITH MIL-STD-1246,CLEANLINESS LEVEL 200 |
| TEMP RATING | -50.0 FAHRENHEIT AND 250.0 FAHRENHEIT SINGLE RESPONSE |
| THREAD CLASS | 2B FIRST END |
| THREAD CLASS | 3B SECOND END |
| THREAD DIRECTION | RIGHT-HAND FIRST END |
| THREAD DIRECTION | RIGHT-HAND SECOND END |
| THREAD QUANTITY PER INCH | 12 FIRST END |
| THREAD SERIES DESIGNATOR | UN FIRST END |
| THREAD SERIES DESIGNATOR | UNF SECOND END |