| END CONNECTION DESIGN | ELBOW SECOND END |
| END CONNECTION DESIGN | STRAIGHT FIRST END |
| BURST TEST PRESSURE | 16000.0 POUNDS PER SQUARE INCH |
| CONNECTION TYPE | THREADED INTERNAL TUBE SECOND END |
| CONNECTION TYPE | THREADED INTERNAL TUBE FIRST END |
| CONNECTION STYLE | SWIVEL NUT FLARE FIRST END |
| CONNECTION STYLE | SWIVEL NUT FLARE SECOND END |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| FLOW ANGLE | 90.0 DEGREES SECOND END |
| HYDROSTATIC TEST PRESSURE | 8000.0 POUNDS PER SQUARE INCH |
| INSIDE DIAMETER | 0.380 INCHES NOMINAL |
| INSIDE SURFACE CONDITION | SMOOTH |
| ITEM STRUCTURAL COMPOSITION | BRAIDED CORROSION RESISTANT STEEL WIRE FIRST LAYER |
| ITEM STRUCTURAL COMPOSITION | BRAIDED CORROSION RESISTANT STEEL WIRE SECOND LAYER |
| ITEM STRUCTURAL COMPOSITION | MOLDED RUBBER, SYNTHETIC OUTER LAYER |
| OPERATING PRESSURE | 4000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED |
| OUTER COVERING ENVIRONMENTAL PROTECTION | OIL RESISTANT AND WEATHERPROOF |
| OUTSIDE DIAMETER | 0.840 INCHES NOMINAL |
| MEASURING METHOD AND LENGTH | 17.000 INCHES NOMINAL WORKING |
| MEDIA FOR WHICH DESIGNED | HYDRAULIC FLUID SINGLE RESPONSE |
| MINIMUM INSIDE BENDING RADIUS | 5.000 INCHES |
| NOMINAL THREAD SIZE | 0.562 INCHES FIRST END |
| NOMINAL THREAD SIZE | 0.562 INCHES SECOND END |
| SEAT ANGLE | 37.0 DEGREES FIRST END |
| SEAT ANGLE | 37.0 DEGREES SECOND END |
| SPECIFICATION/STANDARD DATA | 81343-SAE J517,100R2 GOVERNMENT STANDARD |
| TEMP RATING | -40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE |
| THREAD CLASS | 3B FIRST END |
| THREAD CLASS | 3B SECOND END |
| THREAD DIRECTION | RIGHT-HAND FIRST END |
| THREAD DIRECTION | RIGHT-HAND SECOND END |
| THREAD SERIES DESIGNATOR | UNF FIRST END |
| THREAD SERIES DESIGNATOR | UNF SECOND END |