| END CONNECTION DESIGN | STRAIGHT 1ST END |
| BURST TEST PRESSURE | 4000.0 POUNDS PER SQUARE INCH |
| CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| CONNECTION STYLE | SWIVEL NUT FLARE 1ST END |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| INSIDE DIAMETER | 0.355 INCHES MINIMUM |
| INSIDE SURFACE CONDITION | CONVOLUTED |
| LAYER COMPOSITION AND LOCATION | OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| MAXIMUM OPERATING PRESSURE | 1000.0 POUNDS PER SQUARE INCH |
| HYDROSTATIC TEST PRESSURE | 2000.0 POUNDS PER SQUARE INCH |
| PROPRIETARY CHARACTERISTICS | PACS |
| MEASURING METHOD AND LENGTH | 56.250 INCHES NOMINAL WORKING |
| MINIMUM INSIDE BENDING RADIUS | 2.250 INCHES |
| NOMINAL THREAD SIZE | 0.562 INCHES 1ST END |
| OUTER COVERING ENVIRONMENTAL PROTECTION | ALCOHOL RESISTANT AND OIL RESISTANT AND FUEL RESISTANT AND SOLVENT RESISTANT |
| OUTSIDE DIAMETER | 0.562 INCHES NOMINAL |
| SEAT ANGLE | 37.0 DEGREES 1ST END |
| SPECIAL FEATURES | NONCONDUCTIVE HOSE |
| VACUUM IN TORR | 28.0 |
| TEMP RATING | -65.0 DEG FAHRENHEIT SINGLE RESPONSE AND 400.0 DEG FAHRENHEIT SINGLE RESPONSE |
| THREAD CLASS | 3B 1ST END |
| THREAD DIRECTION | RIGHT-HAND 1ST END |
| THREAD SERIES DESIGNATOR | UNJF 1ST END |