| END CONNECTION DESIGN | ELBOW FIRST END |
| END FLANGE CONSTRUCTION | SOLID FIRST END |
| ANGLE BETWEEN RIGID ELBOW FITTINGS IN DEG | 75.0 |
| BOLT HOLE DIAMETER | 0.469 INCHES NOMINAL FIRST END |
| BOLT HOLE QUANTITY | 4 FIRST END |
| BURST TEST PRESSURE | 20000.0 POUNDS PER SQUARE INCH |
| CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 1.094 INCHES NOMINAL FIRST END |
| CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 2.250 INCHES NOMINAL FIRST END |
| CONNECTION TYPE | PLAIN FACE FLANGE FIRST END |
| CONNECTION STYLE | PLAIN FIRST END |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| FLANGE LENGTH | 3.190 INCHES NOMINAL FIRST END |
| FLANGE STYLE | DOUBLE OVAL (SAE SPLIT TYPE FLANGE) FIRST END |
| FLANGE WIDTH | 2.660 INCHES NOMINAL FIRST END |
| FLANGE THICKNESS | 0.375 INCHES NOMINAL FIRST END |
| FLOW ANGLE | 90.0 DEGREES FIRST END |
| INSIDE DIAMETER | 1.000 INCHES NOMINAL |
| INSIDE SURFACE CONDITION | SMOOTH |
| ITEM STRUCTURAL COMPOSITION | MOLDED RUBBER, SYNTHETIC OUTER LAYER |
| ITEM STRUCTURAL COMPOSITION | SPIRALLY WRAPPED CORROSION RESISTANT STEEL FABRIC FIRST LAYER |
| ITEM STRUCTURAL COMPOSITION | SPIRALLY WRAPPED CORROSION RESISTANT STEEL FABRIC FOURTH LAYER |
| ITEM STRUCTURAL COMPOSITION | SPIRALLY WRAPPED CORROSION RESISTANT STEEL FABRIC SECOND LAYER |
| ITEM STRUCTURAL COMPOSITION | SPIRALLY WRAPPED CORROSION RESISTANT STEEL FABRIC THIRD LAYER |
| OPERATING PRESSURE | 5000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED |
| OUTSIDE DIAMETER | 1.510 INCHES NOMINAL |
| MEASURING METHOD AND LENGTH | 33.000 INCHES NOMINAL OVERALL |
| MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| MINIMUM INSIDE BENDING RADIUS | 14.000 INCHES |
| TEMP RATING | -40.0 FAHRENHEIT AND 250.0 FAHRENHEIT SINGLE RESPONSE |