| TEMP RATING | 800.0 DEG FAHRENHEIT SINGLE RESPONSE |
| HYDROSTATIC TEST PRESSURE | 1100.0 POUNDS PER SQUARE INCH |
| LAYER COMPOSITION AND LOCATION | OUTER LAYER BRAIDED COPPER WIRE |
| MINIMUM INSIDE BENDING RADIUS | 12.000 INCHES |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| BOLT CIRCLE DIAMETER | 3.875 INCHES NOMINAL 1ST END |
| 3.125 INCHES NOMINAL 2ND END |
| INSIDE DIAMETER | 1.500 INCHES NOMINAL |
| OUTSIDE DIAMETER | 2.200 INCHES MAXIMUM |
| INNER CONVEYING TUBE STYLE | ANNULAR CLOSE-PITCH CORRUGATED |
| CONNECTION TYPE | RAISED FACE FLANGE 1ST END |
| RAISED FACE FLANGE 2ND END |
| CONNECTION STYLE | RAISED 1ST END |
| RAISED 2ND END |
| END FLANGE CONSTRUCTION | SOLID 1ST END |
| SOLID 2ND END |
| FLANGE STYLE | ROUND W / BOLT HOLES 1ST END |
| ROUND W / BOLT HOLES 2ND END |
| BOLT HOLE DIAMETER | 0.625 INCHES NOMINAL 1ST END |
| 0.625 INCHES NOMINAL 2ND END |
| FLANGE OUTSIDE DIAMETER | 5.000 INCHES NOMINAL 1ST END |
| 4.250 INCHES NOMINAL 2ND END |
| END CONNECTION DESIGN | ELBOW 1ST END |
| ELBOW 2ND END |
| FLOW ANGLE | 90.0 DEGREES 1ST END |
| 90.0 DEGREES 2ND END |
| ANGLE BETWEEN RIGID ELBOW FITTINGS IN DEG | 180.0 |
| SPECIAL FEATURES | ITEM CONSISTS OF TWO IDENTICAL HOSES JOINED BY A 90.0 DEG ELBOW,ONE LEG HAVING A LENGTH OF 17.970 IN. AND THE OTHER LEG HAVING A LENGTH OF 12.720 IN. |
| BOLT HOLE QUANTITY | 4 1ST END |
| 4 2ND END |
| THE MANUFACTURERS DATA | |
| MANUFACTURERS CODE | 70510 |
| DESIGN CONTROL REFERENCE | AT2022-200 |