| END CONNECTION DESIGN | STRAIGHT FIRST ENDSTRAIGHT FIRST END |
| BURST TEST PRESSURE | 9000.0 POUNDS PER SQUARE INCH9000.0 POUNDS PER SQUARE INCH |
| CONNECTION TYPE | THREADED INTERNAL TUBE FIRST ENDTHREADED INTERNAL TUBE FIRST END |
| CONNECTION STYLE | SWIVEL NUT FLARE FIRST ENDSWIVEL NUT FLARE FIRST END |
| CROSS-SECTIONAL SHAPE STYLE | ROUNDROUND |
| INSIDE DIAMETER | 0.312 INCHES NOMINAL0.312 INCHES NOMINAL |
| INSIDE SURFACE CONDITION | SMOOTHSMOOTH |
| ITEM STRUCTURAL COMPOSITION | BRAIDED WIRE SECOND LAYERRUBBER IMPREGNATED COTTON FABRIC OUTER LAYER |
| OPERATING PRESSURE | 2000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED2000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED |
| OUTSIDE DIAMETER | 0.688 INCHES NOMINAL0.688 INCHES NOMINAL |
| MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON SINGLE RESPONSEFUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| MEASURING METHOD AND LENGTH | 66.125 INCHES NOMINAL EXCLUDING END FITTINGS66.125 INCHES NOMINAL EXCLUDING END FITTINGS |
| MINIMUM INSIDE BENDING RADIUS | 4.000 INCHES4.000 INCHES |
| NOMINAL THREAD SIZE | 0.562 INCHES FIRST END0.562 INCHES FIRST END |
| REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS | AS DIFFERENTIATED BY MAGNETIC PERMEABILITY SHALL BE LESS THAN 1.2 BEFORE FABRICATION AND NOT GREATER THAN 2.0 AFTER FABRICATION AS MEASURED IN A 200 OERSTED FIELD BY PERMEABILITY INDICATOR SPECIFIED IN MILITARY SPEC MIL-I-17214 |
| SEAT ANGLE | 37.0 DEGREES FIRST END37.0 DEGREES FIRST END |
| TEMP RATING | -65.0 FAHRENHEIT AND -65.0 FAHRENHEIT AND 250.0 FAHRENHEIT SINGLE RESPONSE250.0 FAHRENHEIT SINGLE RESPONSE |
| THREAD CLASS | 2B FIRST END2B FIRST END |
| THREAD DIRECTION | RIGHT-HAND FIRST ENDRIGHT-HAND FIRST END |
| THREAD SERIES DESIGNATOR | UNF FIRST END |