|
|
|
National Stock Number:
4330-01-242-3032
Federal Supply Class:
4330
National Item Identification Number:
012423032
Description:
FILTER ELEMENT,FLUID
Detail:
A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a FILTER, FLUID (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes FILTER ELEMENT, AIR CONDITIONING. See also STRAINER ELEMENT, SEDIMENT.
|
Manufacturer Information:
| ACB612F1Y1 | 18350 | PALL AEROPOWER CORPORATION |
|
Techincal Specification:
| BODY DIAMETER | 0.770 INCHES MINIMUM AND 0.775 INCHES MAXIMUM | | BODY OVERALL LENGTH | 3.730 INCHES MINIMUM AND 3.780 INCHES MAXIMUM | | DESIGN TYPE | NONREUSABLE | | DIFFERENTIAL PRESSURE | 4500.0 POUNDS PER SQUARE INCH | | DROP PRESSURE | 18.8 POUNDS PER SQUARE INCH | | FILTRATION RATING IN MICRONS | 25.0 ABSOLUTE | | FLOW DIRECTION | INSIDE OUT | | MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON | | TEMP RATING | -65.0 FAHRENHEIT MINIMUM AND 275.0 FAHRENHEIT MAXIMUM | | SPECIAL FEATURES | SOLID ONE END WITH HOLE FOR LOCKWIRE |
|
|