|
|
|
National Stock Number:
4330-01-238-0259
Federal Supply Class:
4330
National Item Identification Number:
012380259
Description:
FILTER ELEMENT,FLUID
Detail:
A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a FILTER, FLUID (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes FILTER ELEMENT, AIR CONDITIONING. See also STRAINER ELEMENT, SEDIMENT.
|
Manufacturer Information:
| A02HS161-4 | 77272 | THE BOEING COMPANY | | AC-7665F-12UP | 18350 | PALL AEROPOWER CORPORATION | | AC-7665F-12UPL | 18350 | PALL AEROPOWER CORPORATION |
|
Techincal Specification:
| DESIGN TYPE | NONREUSABLE | | DROP PRESSURE | 18.0 POUNDS PER SQUARE INCH | | BODY DIAMETER | 1.600 INCHES MAXIMUM | | BODY OVERALL LENGTH | 1.950 INCHES MAXIMUM | | FILTERING MEDIA DESIGN | PLEATED SINGLE FILTERING MEDIA RESPONSE | | FILTRATION RATING IN MICRONS | 5.0 ABSOLUTE | | FLOW DIRECTION | OUTSIDE IN | | MATERIAL | FIBER SYNTHETIC FILTERING MEDIUM AND RESIN SYNTHETIC FILTERING MEDIUM | | III STYLE DESIGNATOR | CYLINDRICAL W/OUT CONTAINER | | PROPRIETARY CHARACTERISTICS | PACS | | MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON | | SPECIAL FEATURES | W/ O-RING,END CAPS,SPRING | | TEMP RATING | -65.0 DEG FAHRENHEIT MINIMUM AND 275.0 DEG FAHRENHEIT MAXIMUM |
|
|