|
|
|
National Stock Number:
4330-01-232-8305
Federal Supply Class:
4330
National Item Identification Number:
012328305
Description:
FILTER ELEMENT,FLUID
Detail:
A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a FILTER, FLUID (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes FILTER ELEMENT, AIR CONDITIONING. See also STRAINER ELEMENT, SEDIMENT.
|
Manufacturer Information:
| 1300766 | 06816 | PALL CORP | | 1314130 | 06816 | PALL CORP | | 929293 | 05779 | PARKER-HANNIFIN CORPORATION | | 1457440 | 45152 | OSHKOSH CORP | | 1326147 | 64130 | PALL INDUSTRIAL HYDRAULICS CORP | | 1457440 | 75Q65 | OSHKOSH DEFENSE LLC | | D1301489 | 06816 | PALL CORP | | P16-7154 | 18265 | DONALDSON COMPANY, INC. |
|
Techincal Specification:
| DESIGN TYPE | NONREUSABLE | | DIFFERENTIAL PRESSURE | 200.0 POUNDS PER SQUARE INCH | | BODY DIAMETER | 4.280 INCHES NOMINAL | | BODY INSIDE DIAMETER | 1.720 INCHES NOMINAL | | BODY OVERALL LENGTH | 9.340 INCHES NOMINAL | | FILTERING MEDIA DESIGN | PLEATED SINGLE FILTERING MEDIA RESPONSE | | FLOW DIRECTION | OUTSIDE IN | | MATERIAL | ANY ACCEPTABLE BODY | | III STYLE DESIGNATOR | CYLINDRICAL W/OUT CONTAINER | | PART NAME ASSIGNED BY CONTROLLING AGENCY | FILTER, HYDR RSVR | | PROPRIETARY CHARACTERISTICS | PACS | | MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON | | SPECIAL FEATURES | FILTRATION EFFICIENCY AND CAPACITY, AVERAGE FILTRATION RATIO AVG BETA 2 AT 2 MICRON; PRESSURE DROP FLOW IS 2.0 PSI AT 25 GPM; MATERIAL COMPATIBILITY - ALL MATERIALS ARE COMPATIBLE WITH PETROLEUM BASE OILS, TESTED AT 280 DEGREES F; END CAPS SHALL BE TIN PLATED STEEL; LINERS SHALL BE ZINC PLATED STEEL; MEDIA PLEAT SPACING - MEDIA SCREEN BACKED | | TEMP RATING | -20.0 DEG FAHRENHEIT MINIMUM AND 250.0 DEG FAHRENHEIT MAXIMUM |
|
|