| MATERIAL | COPPER ALLOY |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-B-16541 MIL SPEC SINGLE MATERIAL RESPONSE |
| OVERALL LENGTH | 0.875 INCHES NOMINAL |
| FLANGE DIAMETER | 6.062 INCHES NOMINAL |
| BODY OUTSIDE DIAMETER | 5.623 INCHES MINIMUM AND |
| 5.624 INCHES MAXIMUM |
| BODY INSIDE DIAMETER | 5.160 INCHES MINIMUM AND |
| 5.162 INCHES MAXIMUM |
| END TO FLANGE DISTANCE | 0.250 INCHES NOMINAL |
| INTERNAL FLANGE INSIDE DIAMETER | 4.250 INCHES NOMINAL |
| INTERNAL FLANGE WIDTH | 0.250 INCHES NOMINAL |
| CENTER FLANGE THICKNESS | 0.172 INCHES MINIMUM AND |
| 0.177 INCHES MAXIMUM |
| DISTANCE BELOW CENTERLINE | 0.062 INCHES NOMINAL |
| CORNER SHAPE | SQUARE INSIDE LEFT CORNER |
| CHAMFERED INSIDE RIGHT CORNER |
| SQUARE OUTSIDE LEFT CORNER |
| SQUARE OUTSIDE RIGHT CORNER |
| CHAMFER ANGLE | 26.0 DEGREES NOMINAL INSIDE RIGHT CORNER |
| CHAMFER LENGTH | 0.750 INCHES NOMINAL INSIDE RIGHT CORNER |
| SURFACE FINISH | 125.0 MICROINCHES INSIDE |
| 125.0 MICROINCHES LEFT FACE |
| 125.0 MICROINCHES RIGHT FACE |
| 125.0 MICROINCHES OUTSIDE |
| THE MANUFACTURERS DATA | |
| MANUFACTURERS CODE | 83130 |
| DESIGN CONTROL REFERENCE | NA1235-1 |