| STYLE DESIGNATOR | FIXED |
| LENGTH | 2.125 INCHES NOMINAL |
| HOUSING INSIDE DIAMETER | 1.875 INCHES NOMINAL |
| QUANTITY | 1 |
| MATERIAL | ALUMINUM OVERALL |
| SURFACE TREATMENT | ENAMEL OVERALL |
| DRIVE TYPE | DIRECT |
| ROTATION DIRECTION FOR WHICH DESIGNED | COUNTERCLOCKWISE |
| PRIME MOVER TYPE | ELECTRIC MOTOR |
| SPEED ADJUSTMENTS | SINGLE SPEED |
| INCLOSURE TYPE | FULLY INCLOSED |
| AMBIENT TEMP AT FULL RATED POWER | 85.0 DEG CELSIUS |
| ELECTRICAL CONNECTION TYPE | TERMINAL |
| PRIME MOVER POWER RATING | 0.040 HORSEPOWER |
| OPERATING SPEED AT RATED CAPACITY IN RPM | 16500.0 |
| VOLTAGE IN VOLTS AND CURRENT TYPE | 26.0 DC OR |
| 30.0 DC |
| AIR FLOW RATE | 34.000 CUBIC FEET PER MINUTE MAXIMUM |
| STATIC PRESSURE AT SPECIFIED AIR FLOW RATE | 1.5 INCHES OF WATER |
| FLOW DIRECTION | OUTWARD |
| STAGE QUANTITY | 1 |
| MOUNTING FACILITY TYPE AND QUANTITY | 3 LUG AND |
| 3 UNTHREADED HOLE |
| ENVIRONMENTAL PROTECTION | DUSTPROOF AND |
| HUMIDITY PROOF AND |
| SALT SPRAY RESISTANT AND |
| SHOCK PROOF AND |
| VIBRATION PROOF |
| TEST DATA DOCUMENT | 82050-22786 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| THE MANUFACTURERS DATA | |
| MANUFACTURERS CODE | 25140 |
| DESIGN CONTROL REFERENCE | 19A1771 |