| ROTATION DIRECTION FOR WHICH DESIGNED | COUNTERCLOCKWISE |
| DRIVE TYPE | DIRECT |
| AIR FLOW RATE | 130.0 CUBIC FEET PER MINUTE MAXIMUM |
| FLOW DIRECTION | OUTWARD |
| MOUNTING FACILITY TYPE AND QUANTITY | 2 FLANGE AND |
| 8 UNTHREADED HOLE |
| MATERIAL | PLASTIC BLADE |
| ZINC ALLOY HOUSING |
| STYLE DESIGNATOR | FIXED |
| DIAMETER | 4.450 INCHES NOMINAL |
| LENGTH | 1.500 INCHES NOMINAL |
| HOUSING INSIDE DIAMETER | 4.517 INCHES NOMINAL |
| SURFACE TREATMENT | ENAMEL HOUSING |
| PRIME MOVER TYPE | ELECTRIC MOTOR |
| SPEED ADJUSTMENTS | SINGLE SPEED |
| PRIME MOVER DRIVE SHAFT BEARING TYPE | BALL |
| INCLOSURE TYPE | FULLY INCLOSED |
| ELECTRICAL CONNECTION TYPE | CONNECTOR RECEPTACLE |
| PRIME MOVER POWER RATING | 0.026 HORSEPOWER |
| OPERATING SPEED AT RATED CAPACITY IN RPM | 3400.0 |
| VOLTAGE IN VOLTS AND CURRENT TYPE | 115.0 AC |
| PHASE | SINGLE |
| FREQUENCY IN HERTZ | 400.0 |
| STATIC PRESSURE AT SPECIFIED AIR FLOW RATE | 0.0 INCHES OF WATER |
| ENVIRONMENTAL PROTECTION | DUSTPROOF AND |
| MOISTURE RESISTANT |
| SPECIAL FEATURES | 4.69 IN. SQ FLANGE W/HOLE EA CORNER AT BOTH ENDS OF VENTURI TUBE |
| TEST DATA DOCUMENT | 07342-776442 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| THE MANUFACTURERS DATA | |
| MANUFACTURERS CODE | 04320 |
| DESIGN CONTROL REFERENCE | BC2206F1-17 |