| CARRIAGE FEED CHANGE QUANTITY | 48 |
| CARRIAGE CROSS FEED OPERATION METHOD | HAND AND POWER |
| CARRIAGE LONGITUDINAL FEED OPERATION METHOD | HAND AND POWER |
| CARRIAGE QUANTITY | 1 |
| CENTER TO CENTER DISTANCE | 30.000 INCHES NOMINAL |
| CURRENT TYPE | AC |
| DESIGN TYPE | SCREW |
| ELECTRIC MOTOR HORSEPOWER RATING | 7.500 |
| ELECTRIC MOTOR QUANTITY | 2 |
| FREQUENCY IN HERTZ | 60.0 |
| HEADSTOCK DRIVE TYPE | GEARED HEAD OR STEP CONE PULLEY, BACK GEARED |
| HOLE DIAMETER THROUGH SPINDLE | 4.125 INCHES NOMINAL |
| PERFORMANCE TYPE | STANDARD DUTY |
| PHASE | SINGLE/THREE |
| MOUNTING TYPE | FLOOR |
| PURPOSE FOR WHICH DESIGNED | TOOLROOM |
| RATED SWING | 15.500 INCHES NOMINAL |
| SPECIAL FEATURES | 0.250 HORSEPOWER COOLANT MOTOR; CHIP AND COOLANT SHIELD; CHIP PAN; SET OF LEVELING PLATES; TANG DRIVER IN TAILSTOCK SPINDLE; SERVO-SHIFT HEADSTOCK; ELECTRIC BRAKE AND POWER UNIT; TAPERED SPINDLE SLEEVE CENTERS; HARDENED AND GROUND, REPLACEABLE STEEL BEDWAYS; DUAL INCH/METRIC DIALS FOR CROSSFEED; DUAL GRADUATED INCH/METRIC DIAL FOR COMPOUND; CHASING DIAL |
| SPINDLE SPEED QUANTITY | 12 |
| SPINDLE SPEED RANGE IN RPM | +45.0 TO 1800.0 |
| SWING OVER CROSS SLIDE | 9.500 INCHES NOMINAL |
| THREAD CHANGE QUANTITY | 48 |
| THREAD QUANTITY RANGE | +2.0 TO 112.0 PER INCH |
| VOLTAGE IN VOLTS | 110.0 AND 220.0 |