| ALIGNMENT TYPE | SELF-ALIGNING |
| BASE LENGTH | 4.500 INCHES NOMINAL |
| BASE THICKNESS | 1.500 INCHES NOMINAL |
| BLOCK TYPE | FLOATING |
| BORE DIAMETER | 3.4375 INCHES NOMINAL |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH | 2.375 INCHES NOMINAL |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG WIDTH | 12.375 INCHES NOMINAL |
| HEIGHT FROM BOTTOM OF BASE TO BORE CENTERLINE | 4.500 INCHES NOMINAL |
| INTERNAL FIT-UP DESIGNATION | STANDARD |
| LOAD CAPABILITY TYPE | RADIAL AND THRUST |
| LUBRICATION FITTING ANGLE FROM HORIZONTAL CENTERLINE | 45.0 DEGREES NOMINAL |
| LUBRICATION FITTING TYPE | HYDRAULIC |
| MATERIAL DOCUMENT AND CLASSIFICATION | SAE ASSN STD SINGLE MATERIAL RESPONSE INNER RACE |
| MATERIAL DOCUMENT AND CLASSIFICATION | SAE ASSN STD SINGLE MATERIAL RESPONSE OUTER RING |
| MATERIAL DOCUMENT AND CLASSIFICATION | SAE ASSN STD SINGLE MATERIAL RESPONSE ROLLER |
| MATERIAL | COPPER ALLOY RETAINER |
| MATERIAL | IRON CAST HOUSING |
| MATERIAL | RUBBER SYNTHETIC SEAL |
| MATERIAL | STEEL COMP E52100 INNER RACE |
| MATERIAL | STEEL COMP E52100 OUTER RING |
| MATERIAL | STEEL COMP E52100 ROLLER |
| HOUSING LENGTH | 6.000 INCHES NOMINAL |
| HOUSING WIDTH | 15.250 INCHES NOMINAL |
| HOUSING HEIGHT | 8.875 INCHES NOMINAL |
| PROPRIETARY CHARACTERISTICS | PACS |
| MOUNTING HOLE TYPE | SLOTTED |
| MOUNTING SLOT LENGTH | 1.500 INCHES NOMINAL |
| MOUNTING SLOT WIDTH | 0.750 INCHES NOMINAL |
| ROTATING ELEMENT LOCKING METHOD | ADAPTER |
| ROLLING ELEMENT GROOVE QUANTITY | 2 |
| SEAL LOCATION | BOTH ENDS |
| SEAL TYPE | CONTACT |
| SHAFT END TYPE | OPEN |
| STYLE DESIGNATOR | PILLOW BLOCK, OPTIONAL SPLIT |