|
|
|
National Stock Number:
3120-01-243-5337
Federal Supply Class:
3120
National Item Identification Number:
012435337
Description:
BEARING,WASHER,THRUST
Detail:
An item of any peripheral shape usually having one flat or spherical surface and a centrally located hole. It is designed for applications involving moving (kinetic) loads. Except for items fabricated from bearing quality synthetic (plastic) or composed of multilayer material, one bearing surface must either have a specific surface finish designation of 32 microinch (0.8 micrometre) or less, arithmetical average (aa) (arithmetic mean deviation) or one of the following conditions: be lapped or ground; have visible or detectable means of lubrication; grooves, indentations; or self-lubrication. The thickness must not exceed 25 percent of the outside diameter of the shortest distance between peripheral flats (when thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance). Excludes straight, tubular (without flange) items having a bearing surface(s) parallel to the axis of the bore only. See also WASHER, FLAT and SPACER, SLEEVE.
|
Manufacturer Information:
|
Techincal Specification:
| MATERIAL | STEEL OVERALL | | STYLE DESIGNATOR | ROUND | | OUTSIDE DIAMETER | 2.0000 INCHES NOMINAL | | CORNER SHAPE | SQUARE ALL CORNERS | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | OVERALL THICKNESS | 0.2400 INCHES MINIMUM AND | | 0.2600 INCHES MAXIMUM | | CENTER HOLE SHAPE STYLE | ROUND | | DIAMETER | 0.7600 INCHES MINIMUM AND | | 0.7800 INCHES MAXIMUM | | SPECIAL FEATURES | ITEM HAS 4 OIL GROOVES SPACED 90 DEG APART AT A DEPTH .010 INS. MIN. TO .018 INS. MAX. | | CUBIC MEASURE | 48.00 CUBIC INCHES | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 15434 | | DESIGN CONTROL REFERENCE | 180767 |
|
|