|
|
|
National Stock Number:
3120-01-234-7676
Federal Supply Class:
3120
National Item Identification Number:
012347676
Description:
BEARING,WASHER,THRUST
Detail:
An item of any peripheral shape usually having one flat or spherical surface and a centrally located hole. It is designed for applications involving moving (kinetic) loads. Except for items fabricated from bearing quality synthetic (plastic) or composed of multilayer material, one bearing surface must either have a specific surface finish designation of 32 microinch (0.8 micrometre) or less, arithmetical average (aa) (arithmetic mean deviation) or one of the following conditions: be lapped or ground; have visible or detectable means of lubrication; grooves, indentations; or self-lubrication. The thickness must not exceed 25 percent of the outside diameter of the shortest distance between peripheral flats (when thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance). Excludes straight, tubular (without flange) items having a bearing surface(s) parallel to the axis of the bore only. See also WASHER, FLAT and SPACER, SLEEVE.
|
Manufacturer Information:
| 135B6725-4 | 05606 | GENERAL DYNAMICS-OTS, INC. |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CORNER SHAPE | SQUARE ALL CORNERS | | CROSS-SECTIONAL SHAPE STYLE | SHOULDERED | | DIAMETER | 1.3760 INCHES MINIMUM AND 1.3770 INCHES MAXIMUM | | FLANGE THICKNESS | 0.1100 INCHES MINIMUM AND 0.1300 INCHES MAXIMUM | | OUTSIDE DIAMETER | 1.9900 INCHES MINIMUM AND 2.0100 INCHES MAXIMUM | | OVERALL THICKNESS | 0.2200 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-B-5687,TYPE 1,COMP A MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | COPPER ALLOY 841 OVERALL | | MATERIAL | OIL LUBRICATING LUBRICATION | | SHANK OUTSIDE DIAMETER | 1.6265 INCHES MINIMUM AND 1.6280 INCHES MAXIMUM | | STYLE DESIGNATOR | ROUND | | SURFACE CONDITION | LAPPED |
|
|