3120-01-234-6422 BEARING,SLEEVE Index 3120-01-234-6424 BUSHING,SLEEVE

National Stock Number:
3120-01-234-6423

Federal Supply Class:
3120

National Item Identification Number:
012346423

Description:
BEARING,SLEEVE

Detail:
A tubular shaped item with or without flange(s) designed to reduce friction and carry a kinetic load on the surface(s) parallel to the axis of the bore. It must have a visible or detectable means of lubrication or be self-lubricated. The over all length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body, except for straight tubular (without flange or shoulder) items having a bearing surface(s) parallel to the axis of the bore only. Includes items which are divided into two or more segments which include 180 degrees (3.141 radians) or less of the bearing periphery. See also BUSHING, SLEEVE; SPACER, SLEEVE; and WASHER (as modified). Excludes PIN, HOLLOW.


Manufacturer Information:
AS81934/20U583SAE INTERNATIONAL
AS81934/281343SOCIETY OF AUTOMOTIVE ENGINEERS INC
M81934/2-16A0080U583SAE INTERNATIONAL
FBE16A0873134ROLLER BEARING COMPANY OF AMERICA, INC.
M81934/2-16A00881343SOCIETY OF AUTOMOTIVE ENGINEERS INC
M81934/2-16A00881349MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MIL-B-81934/281349MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M


Techincal Specification:
BODY INSIDE DIAMETER1.0005 INCHES MINIMUM AND 1.0015 INCHES MAXIMUM
BODY OUTSIDE DIAMETER1.1893 INCHES MINIMUM AND 1.1903 INCHES MAXIMUM
CORNER SHAPESQUARE LEFT FLANGE OUTSIDE RIGHT CORNER
CORNER SHAPESQUARE OUTSIDE LEFT CORNER
CORNER SHAPESQUARE INSIDE LEFT CORNER
CORNER SHAPESQUARE INSIDE RIGHT CORNER
CORNER SHAPESQUARE OUTSIDE RIGHT CORNER
CORNER SHAPEUNDERCUT LEFT FLANGE BODY CORNER
FLANGE OUTSIDE DIAMETER1.7300 INCHES MINIMUM AND 1.7500 INCHES MAXIMUM
FLANGE WIDTH0.0575 INCHES MINIMUM AND 0.0625 INCHES MAXIMUM
OVERALL LENGTH0.2975 INCHES MINIMUM AND 0.3125 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-200/3 T851 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-A-225/6 T8511 FED SPEC SINGLE MATERIAL RESPONSE OUTER LAYER
MATERIALALUMINUM ALLOY 2024 OUTER LAYER
MATERIALPLASTIC POLYTETRAFLUOROETHYLENE INNER LAYER
MATERIALPLASTIC POLYTETRAFLUOROETHYLENE LEFT END SURFACE OF BODY AND FLANGE
SPECIAL FEATURESLINER BONDED TO FACE OF FLANGE
SPECIFICATION/STANDARD DATA81349-MIL-B-81934/2 GOVERNMENT SPECIFICATION
STYLE DESIGNATORSOLID, EXTERNAL FLANGE ONE END
SURFACE FINISH63.0 MICROINCHES OUTSIDE DIAMETER SURFACE OF BODY
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-A-8625,TYPE 1 OR TYPE 2 MIL SPEC 1ST TREATMENT RESPONSE OR MIL-C-5541 MIL SPEC 2ND TREATMENT RESPONSE OUTSIDE DIAMETER SURFACE OF BODY
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-A-8625,TYPE 1 OR TYPE 2 MIL SPEC 1ST TREATMENT RESPONSE OR MIL-C-5541 MIL SPEC 2ND TREATMENT RESPONSE RIGHT END SURFACE OF BODY
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-A-8625,TYPE 1 OR TYPE 2 MIL SPEC 1ST TREATMENT RESPONSE OR MIL-C-5541 MIL SPEC 2ND TREATMENT RESPONSE RIGHT END SURFACE OF LEFT FLANGE
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-A-8625,TYPE 1 OR TYPE2 MIL SPEC 1ST TREATMENT RESPONSE OR MIL-C-5541 MIL SPEC 2ND TREATMENT RESPONSE OUTSIDE DIAMETER SURFACE OF FLANGE
SURFACE TREATMENTANODIZE OR CHROMATE RIGHT END SURFACE OF LEFT FLANGE
SURFACE TREATMENTANODIZE OR CHROMATE OUTSIDE DIAMETER SURFACE OF BODY
SURFACE TREATMENTANODIZE OR CHROMATE OUTSIDE DIAMETER SURFACE OF FLANGE
SURFACE TREATMENTANODIZE OR CHROMATE RIGHT END SURFACE OF BODY


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us