|
|
|
National Stock Number:
3120-00-171-2204
Federal Supply Class:
3120
National Item Identification Number:
001712204
Description:
BEARING,PLAIN,ROD END
Detail:
A detachable assembly in or on which a journal, gudgeon, pivot, or the like moves. It is used to carry a load and to reduce sliding friction. It does not employ rolling elements. The outer member of the assembly is modified to provide a shank. The inner member may be either a plain spherical bearing or a sleeve bearing. Excludes BEARING, PLAIN, SPHERICAL and BEARING, PLAIN, SELF-ALIGNING.
|
Manufacturer Information:
| A51P60706-3 | 0BVP9 | CAPY MACHINE SHOP INC. | | A51P60706-3 | 26512 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | A51P60706-3 | 61174 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | A51P60706-3 | 65777 | HOWE MACHINE & TOOL CORP. | | A51P60706-3 | 79RG9 | NORTHROP GRUMMAN SYSTEMS CORPORATION |
|
Techincal Specification:
| MATERIAL | STEEL COMP 440C INNER MEMBER | | STEEL CORROSION RESISTING RACE INSERT | | STEEL COMP 630 ROD END BODY | | MATERIAL DOCUMENT AND CLASSIFICATION | CLASS 440C,81376 MFR REF SINGLE MATERIAL RESPONSE INNER MEMBER | | AMS 5343 ASSN STD SINGLE MATERIAL RESPONSE ROD END BODY | | SURFACE TREATMENT | CHROMIUM INNER MEMBER | | STYLE DESIGNATOR | BALL TYPE | | OVERALL LENGTH | 1.7660 INCHES NOMINAL | | BORE DIAMETER | 0.1895 INCHES MINIMUM AND | | 0.1900 INCHES MAXIMUM | | OUTER MEMBER OUTSIDE DIAMETER | 0.7820 INCHES NOMINAL | | BORE CENTER TO SHANK END DISTANCE | 1.3750 INCHES NOMINAL | | OUTER MEMBER WIDTH | 0.2130 INCHES MINIMUM AND | | 0.2230 INCHES MAXIMUM | | INNER MEMBER WIDTH | 0.2760 INCHES MINIMUM AND | | 0.2810 INCHES MAXIMUM | | SHANK STYLE | EXTERNALLY THREADED | | SHANK THREAD LENGTH | 0.7500 INCHES NOMINAL | | THREAD SERIES DESIGNATOR | UNF | | THREAD DIAMETER | 0.190 INCHES NOMINAL | | THREAD QUANTITY PER INCH | 32 | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | SPECIAL FEATURES | 0.0740 IN. DIA HOLE DRILLED IN SHANK 0.9700 IN. DEEP | | TEST DATA DOCUMENT | 81349-MIL-I-6868 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 26512 | | DESIGN CONTROL REFERENCE | A51P60706-3 |
|
|