|
|
|
National Stock Number:
3120-00-163-9413
Federal Supply Class:
3120
National Item Identification Number:
001639413
Description:
BEARING,WASHER,THRUST
Detail:
An item of any peripheral shape usually having one flat or spherical surface and a centrally located hole. It is designed for applications involving moving (kinetic) loads. Except for items fabricated from bearing quality synthetic (plastic) or composed of multilayer material, one bearing surface must either have a specific surface finish designation of 32 microinch (0.8 micrometre) or less, arithmetical average (aa) (arithmetic mean deviation) or one of the following conditions: be lapped or ground; have visible or detectable means of lubrication; grooves, indentations; or self-lubrication. The thickness must not exceed 25 percent of the outside diameter of the shortest distance between peripheral flats (when thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance). Excludes straight, tubular (without flange) items having a bearing surface(s) parallel to the axis of the bore only. See also WASHER, FLAT and SPACER, SLEEVE.
|
Manufacturer Information:
| 3017T74P01 | 99207 | GENERAL ELECTRIC COMPANY |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CORNER SHAPE | SQUARE ALL CORNERS | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | DIAMETER | 0.4270 INCHES MINIMUM AND 0.4370 INCHES MAXIMUM | | OUTSIDE DIAMETER | 0.8090 INCHES MINIMUM AND 0.8110 INCHES MAXIMUM | | OVERALL THICKNESS | 0.0697 INCHES MINIMUM AND 0.0703 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5759 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | COBALT COMP L-605 OVERALL | | STYLE DESIGNATOR | ROUND | | SURFACE FINISH | 32.0 MICROINCHES OVERALL |
|
|