| BEARING SEAL TYPE | CONTACT |
| BORE DIAMETER | 0.2500 INCHES NOMINAL |
| LOAD DIRECTION | RADIAL |
| LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | BRAYCO 8152,CAGEC 33032 ASSN STD SINGLE MATERIAL RESPONSE |
| OVERALL OUTSIDE DIAMETER | 0.3750 INCHES NOMINAL |
| OVERALL WIDTH | 0.2500 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5516 ASSN STD SINGLE MATERIAL RESPONSE SHIELD |
| MATERIAL DOCUMENT AND CLASSIFICATION | L-P-410 MFR REF SINGLE MATERIAL RESPONSE RETAINER |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE BALL |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE INNER RING |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OUTER RING |
| MATERIAL | OIL LUBRICATION |
| MATERIAL | PLASTIC POLYAMIDE NYLON RETAINER |
| MATERIAL | STEEL COMP 302 SHIELD |
| MATERIAL | STEEL COMP 440C BALL |
| MATERIAL | STEEL COMP 440C INNER RING |
| MATERIAL | STEEL COMP 440C OUTER RING |
| SHIELD QUANTITY | 8 |
| RETAINER FABRICATION METHOD | PRESSED |
| SPECIAL FEATURES | EACH BEARING SHALL BE LUBRICATED WITH ONE DROP FROM A NO. 26 NEEDLE USING LOWGASSING OIL,BRAYCO 815Z |
| STANDARD TOLERANCE DESIGNATION | ABEC NO. 5P |
| STYLE DESIGNATOR | NON-LOADING GROOVE, NON-SEPARABLE, BACK TO BACK MOUNTING |
| SURFACE FINISH | GROUND |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | ASTM-A380 ASSN STD SINGLE TREATMENT RESPONSE BALL |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | ASTM-A380 ASSN STD SINGLE TREATMENT RESPONSE INNER RING |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | ASTM-A380 ASSN STD SINGLE TREATMENT RESPONSE OUTER RING |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | ASTM-A380 ASSN STD SINGLE TREATMENT RESPONSE SHIELD |
| SURFACE TREATMENT | PASSIVATE BALL |
| SURFACE TREATMENT | PASSIVATE INNER RING |
| SURFACE TREATMENT | PASSIVATE OUTER RING |
| SURFACE TREATMENT | PASSIVATE SHIELD |