| ALIGNMENT TYPE | RIGID |
| BEARING PRELOAD RATING | 5.0 POUNDS NOMINAL |
| BORE DIAMETER | 20.0 MILLIMETERS NOMINAL |
| BORE SHAPE | STRAIGHT |
| CONTACT ANGLE | 12.0 DEGREES MINIMUM AND 18.0 DEGREES MAXIMUM |
| INTERNAL FIT-UP DESIGNATION | STANDARD |
| LOAD DIRECTION | ANGULAR |
| LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-81322 MIL SPEC SINGLE MATERIAL RESPONSE AND MOBIL 28,CAGE 19135 MFR REF SINGLE MATERIAL RESPONSE |
| LUBRICATION MATERIAL | GREASE |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6415 ASSN STD SINGLE MATERIAL RESPONSE RETAINER |
| MATERIAL DOCUMENT AND CLASSIFICATION | SAE ASSN STD SINGLE MATERIAL RESPONSE BALL |
| MATERIAL DOCUMENT AND CLASSIFICATION | SAE ASSN STD SINGLE MATERIAL RESPONSE OUTER RING |
| MATERIAL DOCUMENT AND CLASSIFICATION | SAE ASSN STD SINGLE MATERIAL RESPONSE INNER RING |
| MATERIAL | STEEL COMP E52100 BALL |
| MATERIAL | STEEL COMP E52100 INNER RING |
| MATERIAL | STEEL COMP E52100 OUTER RING |
| MATERIAL | STEEL CORROSION RESISTING SHIELD |
| MATERIAL | STEEL COMP 4340 RETAINER |
| OVERALL OUTSIDE DIAMETER | 47.0 MILLIMETERS NOMINAL |
| OVERALL WIDTH | 14.0 MILLIMETERS NOMINAL |
| PRECIOUS MATERIAL AND LOCATION | PLATED RETAINER SILVER |
| PRECIOUS MATERIAL | SILVER |
| RETAINER FABRICATION METHOD | MACHINED |
| SHIELD QUANTITY | 1 |
| SPECIAL FEATURES | HEAT STABILIZED FOR OPERATION AT -65.0 DEG F TO +300.0 DEG F |
| STANDARD TOLERANCE DESIGNATION | ABEC NO.5 |
| STYLE DESIGNATOR | LOADING GROOVE, NON-SEPARABLE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | AMS 2410 ASSN STD SINGLE TREATMENT RESPONSE RETAINER |
| SURFACE FINISH | GROUND |
| SURFACE TREATMENT | SILVER RETAINER |