| MATERIAL | STEEL OUTER RING |
| STEEL COMP E50100 OR |
| STEEL COMP E52100 ROLLER |
| RESIN SYNTHETIC OR |
| PLASTIC POLYAMIDE SEAL |
| STEEL OR |
| STEEL COMP 8620 STUD |
| STEEL COMP 1074 WASHER |
| SURFACE TREATMENT | CHROMIUM OUTER RING |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-C-320,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OUTER RING |
| STYLE DESIGNATOR | CAM FOLLOWER |
| THREAD LENGTH | 0.2500 INCHES NOMINAL |
| OVERALL LENGTH | 0.9790 INCHES MINIMUM AND |
| 1.0470 INCHES MAXIMUM |
| OVERALL OUTSIDE DIAMETER | 0.4990 INCHES MINIMUM AND |
| 0.5000 INCHES MAXIMUM |
| STUD DIAMETER | 0.1900 INCHES MINIMUM AND |
| 0.1910 INCHES MAXIMUM |
| OUTER RING WIDTH | 0.3700 INCHES MINIMUM AND |
| 0.3750 INCHES MAXIMUM |
| STUD LENGTH | 0.6090 INCHES MINIMUM AND |
| 0.6410 INCHES MAXIMUM |
| THREAD SERIES DESIGNATOR | UNF |
| NOMINAL THREAD SIZE | 0.191 INCHES |
| THREAD QUANTITY PER INCH | 32 |
| THREAD CLASS | 2A |
| THREAD DIRECTION | RIGHT-HAND |
| LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-81322 MIL SPEC SINGLE MATERIAL RESPONSE |
| STANDARD TOLERANCE DESIGNATION | AFBMA STD TOLERANCE FOR CAN FOLLWER NEEDLE BEARING |
| INTERNAL CLEARANCE | 0.0023 INCHES NOMINAL RADIAL |
| LUBRICATION MATERIAL | GREASE |
| SPECIAL FEATURES | ALL EXTERNAL SURFACES EXCEPT THE UNTHREADED PORTION OF STUD SHANK CADMIUM PLATED PER QQ-P-416,TYPE 1,CLASS 2,0.0003 MIN THICKNESS |
| THE MANUFACTURERS DATA | |
| MANUFACTURERS CODE | 3NPS1 |
| DESIGN CONTROL REFERENCE | CC59452-7 |