| ALIGNMENT TYPE | RIGID |
| BORE DIAMETER | 0.1875 INCHES MINIMUM AND 0.1877 INCHES MAXIMUM |
| BORE SHAPE | STRAIGHT |
| CONTACT ANGLE | 22.0 DEGREES MINIMUM AND 28.0 DEGREES MAXIMUM |
| FLANGE OUTSIDE DIAMETER | 0.6280 INCHES MINIMUM AND 0.6300 INCHES MAXIMUM |
| FLANGE WIDTH | 0.0560 INCHES MINIMUM AND 0.0590 INCHES MAXIMUM |
| INTERNAL CLEARANCE | 0.0022 INCHES MINIMUM RADIAL AND 0.0026 INCHES MAXIMUM RADIAL |
| LOAD DIRECTION | ANGULAR |
| OUTER RING OUTSIDE DIAMETER | 0.5630 INCHES MINIMUM AND 0.5632 INCHES MAXIMUM |
| OVERALL WIDTH | 0.2490 INCHES MINIMUM AND 0.2510 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | S-2058,CAGE 35351 MFR REF SINGLE MATERIAL RESPONSE BALL |
| MATERIAL DOCUMENT AND CLASSIFICATION | S-2058,CAGE 35351 MFR REF SINGLE MATERIAL RESPONSE INNER RING |
| MATERIAL DOCUMENT AND CLASSIFICATION | S-2058,CAGE 35351 MFR REF SINGLE MATERIAL RESPONSE OUTER RING |
| MATERIAL DOCUMENT AND CLASSIFICATION | S-2230,CAGE 35351 MFR REF SINGLE MATERIAL RESPONSE RETAINER |
| MATERIAL | PLASTIC POLYAMIDE RETAINER |
| MATERIAL | STEEL BALL |
| MATERIAL | STEEL CORROSION RESISTING SHIELD |
| MATERIAL | STEEL INNER RING |
| MATERIAL | STEEL OUTER RING |
| RETAINER FABRICATION METHOD | MACHINED |
| SHIELD QUANTITY | 2 |
| STANDARD TOLERANCE DESIGNATION | ABEC NO. 9P |
| SPECIAL FEATURES | RETAINER VACUUM IMPREGNATED WITH OIL PER SM2231,CAGE 35351; BOTH RINGS TREATED WITH TRICRESYL PHOSPHATE PER SB1504,CAGE 35351 |
| STYLE DESIGNATOR | SHOULDERED INNER RING, SEPARABLE |
| SURFACE FINISH | GROUND |