| BORE DIAMETER | 0.3750 INCHES NOMINAL |
| BORE SHAPE | STRAIGHT |
| FLANGE OUTSIDE DIAMETER | 0.9690 INCHES NOMINAL |
| FLANGE WIDTH | 0.0620 INCHES NOMINAL |
| INTERNAL CLEARANCE | 0.0002 INCHES MINIMUM RADIAL AND 0.0005 INCHES MAXIMUM RADIAL |
| LOAD DIRECTION | RADIAL |
| LUBRICATION MATERIAL | GREASE |
| LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE |
| OUTER RING OUTSIDE DIAMETER | 0.8750 INCHES NOMINAL |
| OVERALL WIDTH | 0.2812 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | AISI ASSN STD SINGLE MATERIAL RESPONSE BALL |
| MATERIAL DOCUMENT AND CLASSIFICATION | AISI ASSN STD SINGLE MATERIAL RESPONSE INNER RING |
| MATERIAL DOCUMENT AND CLASSIFICATION | AISI ASSN STD SINGLE MATERIAL RESPONSE OUTER RING |
| MATERIAL DOCUMENT AND CLASSIFICATION | AISI ASSN STD SINGLE MATERIAL RESPONSE SHIELD |
| MATERIAL | PLASTIC PHENOLIC RETAINER |
| MATERIAL | STEEL COMP 440C BALL |
| MATERIAL | STEEL COMP 440C OUTER RING |
| MATERIAL | STEEL COMP 440C INNER RING |
| MATERIAL | STEEL COMP 440C SHIELD |
| RETAINER FABRICATION METHOD | MOLDED |
| SHIELD QUANTITY | 2 |
| SPECIAL FEATURES | PRE-LUBRICATION WITH GREASE AND SOLVENT BY VOLUME OF SPECIFIED LUBRICANT |
| STANDARD TOLERANCE DESIGNATION | ABEC NO. 5P |
| STYLE DESIGNATOR | NON-LOADING GROOVE, NON-SEPARABLE |
| SURFACE FINISH | GROUND |