| DISTANCE FROM HORIZONTAL CENTERLINE TO CENTER OF RIGHT HOLE | 0.348 INCHES MINIMUM AND 0.352 INCHES MAXIMUM |
| DISTANCE FROM VERTICAL CENTERLINE TO CENTER OF RIGHT HOLE | 1.858 INCHES MINIMUM AND 1.862 INCHES MAXIMUM |
| APERTURE DIAMETER | 3.620 INCHES NOMINAL |
| COUNTERBORE DEPTH | 0.100 INCHES NOMINAL |
| COUNTERBORE DIAMETER | 0.150 INCHES NOMINAL |
| CROSS-SECTIONAL SHAPE STYLE | FLAT W/APERTURE |
| DISTANCE BETWEEN HOLES ALONG LENGTH | 3.720 INCHES NOMINAL |
| DISTANCE BETWEEN HOLES ALONG WIDTH | 0.700 INCHES NOMINAL |
| OUTSIDE DIAMETER | 3.994 INCHES NOMINAL |
| OVERALL THICKNESS | 0.187 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | STEEL COMP 303SE OVERALL |
| MOUNTING HOLE ARRANGEMENT STYLE | FOUR HOLES |
| MOUNTING HOLE DIAMETER | 0.096 INCHES NOMINAL |
| MOUNTING HOLE TYPE | ROUND, UNTHREADED, COUNTERBORED |
| SPECIAL FEATURES | ELIPTICAL APERTURE; TWO 0.0930 IN. DIA CENTERED ON HOKIZ CL; FOUR 0.060-80 UNF THREADED HOLES,TWO EA 1.885 IN. ABOVE AND BELOW HORIZ CL AND 0.180 IN. LEFT AND RIGHT OF VERT CL |
| STYLE DESIGNATOR | ROUND |
| SURFACE FINISH | 63.0 MICROINCHES BOTH FACES |
| SURFACE FINISH | 63.0 MICROINCHES OUTSIDE DIAMETER |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE BOTH FACES |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OUTSIDE DIAMETER |
| SURFACE TREATMENT | PAINT APERTURE |
| SURFACE TREATMENT | PASSIVATE BOTH FACES |
| SURFACE TREATMENT | PASSIVATE OUTSIDE DIAMETER |