| MATERIAL | STEEL COMP E52100 INNER RING |
| STEEL COMP 4130 OUTER RING |
| STEEL COMP 4130 ROD END BODY |
| STEEL COMP E52100 ROLLER |
| PLASTIC POLYTETRAFLUOROETHYLENE SEAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD SINGLE MATERIAL RESPONSE INNER RING |
| 66 FED STD SINGLE MATERIAL RESPONSE OUTER RING |
| 66 FED STD SINGLE MATERIAL RESPONSE ROD END BODY |
| 66 FED STD SINGLE MATERIAL RESPONSE ROLLER |
| AMS 3652 ASSN STD SINGLE MATERIAL RESPONSE SEAL |
| SURFACE TREATMENT | CADMIUM OVERALL |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 1,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| STYLE DESIGNATOR | SINGLE ROW, CONCAVE ROLLERS |
| SELF-ALIGNMENT ANGLE | 10.00 DEGREES NOMINAL |
| OVERALL LENGTH | 2.3340 INCHES MINIMUM AND |
| 2.3540 INCHES MAXIMUM |
| BORE DIAMETER | 0.2495 INCHES MINIMUM AND |
| 0.2500 INCHES MAXIMUM |
| OVERALL OUTSIDE DIAMETER | 1.0520 INCHES MINIMUM AND |
| 1.0720 INCHES MAXIMUM |
| OUTER RING WIDTH | 0.3490 INCHES MINIMUM AND |
| 0.3690 INCHES MAXIMUM |
| INNER RING WIDTH | 0.4950 INCHES MINIMUM AND |
| 0.5000 INCHES MAXIMUM |
| LENGTH FROM BORE CENTER TO SHANK END | 1.8030 INCHES MINIMUM AND |
| 1.8230 INCHES MAXIMUM |
| SHANK STYLE | EXTERNALLY THREADED |
| SHANK DIAMETER | 0.3678 INCHES MINIMUM AND |
| 0.3750 INCHES MAXIMUM |
| SHANK THREAD LENGTH | 1.0940 INCHES MINIMUM AND |
| 1.1560 INCHES MAXIMUM |
| THREAD SERIES DESIGNATOR | UNJF |
| NOMINAL THREAD SIZE | 0.375 INCHES |
| THREAD QUANTITY PER INCH | 24 |
| THREAD CLASS | 3A |
| THREAD DIRECTION | RIGHT-HAND |
| LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-81322 MIL SPEC SINGLE MATERIAL RESPONSE |
| SEAL QUANTITY | 2 |
| BEARING SEAL TYPE | CONTACT |
| ALIGNMENT TYPE | SELF-ALIGNING |
| SELF-ALIGNMENT LOCATION | INTERNAL |
| SPECIAL FEATURES | LUBRICATED 40 TO 50 PERCENT FULL |
| LUBRICATION MATERIAL | GREASE |