| MATERIAL | STEEL |
| MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A304 ASSN STD SINGLE MATERIAL RESPONSE |
| WORM THREAD QUANTITY | 1 |
| WORM PRESSURE ANGLE IN DEG | 20.000 |
| WORM THREAD LEAD | 0.5088 INCHES NOMINAL |
| WORM THREAD DIRECTION | LEFT-HAND |
| WORM HELIX ANGLE | 4 DEG 15 MIN |
| WORM OUTSIDE DIAMETER | 2.942 INCHES MINIMUM AND |
| 2.946 INCHES MAXIMUM |
| WORM PITCH DIAMETER | 2.505 INCHES NOMINAL |
| WORM THREAD SECTION LENGTH | 3.560 INCHES MINIMUM AND |
| 3.600 INCHES MAXIMUM |
| WORM BODY TAPERED BEARING SURFACE END | NOT PROVIDED |
| SHAFT LOCATION | BOTH ENDS OF WORM |
| END SIMILARITY | NOT IDENTICAL |
| STRAIGHT UNTHREADED LENGTH | 2.624 INCHES NOMINAL FIRST END, FIRST PORTION |
| 1.036 INCHES NOMINAL FIRST END, SECOND PORTION |
| 3.119 INCHES NOMINAL SECOND END, FIRST PORTION |
| 1.707 INCHES NOMINAL SECOND END, SECOND PORTION |
| 1.658 INCHES NOMINAL SECOND END, THIRD PORTION |
| STRAIGHT UNTHREADED SECTION DIAMETER | 2.089 INCHES NOMINAL FIRST END, FIRST PORTION |
| 1.574 INCHES NOMINAL FIRST END, SECOND PORTION |
| 2.089 INCHES NOMINAL SECOND END, FIRST PORTION |
| 1.770 INCHES NOMINAL SECOND END, SECOND PORTION |
| 1.563 INCHES NOMINAL SECOND END, THIRD PORTION |
| KEYWAY WIDTH | 0.313 INCHES NOMINAL FIRST END, THIRD PORTION |
| 0.313 INCHES NOMINAL SECOND END, FOURTH PORTION |
| KEYWAY DEPTH | 0.105 INCHES NOMINAL FIRST END, THIRD PORTION |
| 0.094 INCHES NOMINAL SECOND END, FOURTH PORTION |
| SCREW THREAD SERIES DESIGNATOR | UN FIRST END, THIRD PORTION |
| UN SECOND END, FOURTH PORTION |
| SHAFT THREAD DIRECTION | RIGHT-HAND FIRST END, THIRD PORTION |
| RIGHT-HAND SECOND END, FOURTH PORTION |
| THREAD LENGTH | 0.710 INCHES NOMINAL FIRST END, THIRD PORTION |
| 0.748 INCHES NOMINAL SECOND END, FOURTH PORTION |
| OVERALL LENGTH | 15.200 INCHES NOMINAL |
| SPECIAL FEATURES | SECOND END HAS SECOND KEYWAY,0.375 IN. WIDTH, 0.204 IN. DEPTH |