|
|
|
National Stock Number:
3040-01-383-5696
Federal Supply Class:
3040
National Item Identification Number:
013835696
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 6405258 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 6405258-201 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 752-6405258-201 | 53711 | NAVAL SEA SYSTEMS COMMAND |
|
Techincal Specification:
| END SIMILARITY | IDENTICAL | | FIRST END DIAMETER | 1.1648 INCHES MINIMUM AND 1.1730 INCHES MAXIMUM | | FIRST END KEYWAY DEPTH | 0.134 INCHES NOMINAL | | FIRST END KEYWAY WIDTH | 0.1880 INCHES MINIMUM AND 0.2040 INCHES MAXIMUM | | FIRST END EXTERNAL THREAD LENGTH | 0.590 INCHES NOMINAL | | FIRST END STYLE | EXTERNALLY THREADED AND FLAT KEYWAY | | LARGEST STEP DIAMETER | 1.625 INCHES NOMINAL | | OVERALL LENGTH | 5.928 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5000 COND C-2 MIL SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL | | STEP QUANTITY | 5 |
|
|