|
|
|
National Stock Number:
3040-01-281-6753
Federal Supply Class:
3040
National Item Identification Number:
012816753
Description:
COLLAR,SHAFT
Detail:
An item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.
|
Manufacturer Information:
| 7594192 | 19200 | US ARMY ARDEC RDECOM |
|
Techincal Specification:
| MATERIAL | STEEL COMP 202 OR | | STEEL COMP 302 OR | | STEEL COMP 303 OR | | STEEL COMP 303SE OR | | STEEL COMP 304 OR | | STEEL COMP 304L OR | | STEEL COMP 305 OR | | STEEL COMP 309 OR | | STEEL COMP 310 OR | | STEEL COMP 316 OR | | STEEL COMP 316L OR | | STEEL COMP 317 OR | | STEEL COMP 321 OR | | STEEL COMP 322 OR | | STEEL COMP 324 OR | | STEEL COMP 347 OR | | STEEL COMP 633 OR | | STEEL COMP 634 OR | | STEEL COMP 403 OR | | STEEL COMP 405 OR | | STEEL COMP 410 OR | | STEEL COMP 414 OR | | STEEL COMP 416 OR | | STEEL COMP 416SE OR | | STEEL COMP 420 OR | | STEEL COMP 430 OR | | STEEL COMP 430F OR | | STEEL COMP 430FSE OR | | STEEL COMP 431 OR | | STEEL COMP 440A OR | | STEEL COMP 440B OR | | STEEL COMP 440C OR | | STEEL COMP 440F OR | | STEEL COMP 440FSE OR | | STEEL COMP 446 | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE | | STYLE DESIGNATOR | ROUND STEPPED | | OUTSIDE DIAMETER | 0.6875 INCHES NOMINAL | | THICKNESS | 1.3750 INCHES NOMINAL | | SMALL END DIAMETER | 0.5622 INCHES NOMINAL | | BORE DIAMETER | 0.3125 INCHES NOMINAL | | LARGEST DIAMETER LENGTH | 0.2188 INCHES NOMINAL | | SECURING HOLE QUANTITY | 2 | | ANGLE BETWEEN CENTERLINES OF SECURING HOLES IN DEG | 180.0 | | SECURING HOLE TYPE AND LOCATION | UNTHREADED ALL HOLES | | HOLE DIAMETER AND LOCATION | 0.0860 INCHES NOMINAL ALL HOLES | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 19200 | | DESIGN CONTROL REFERENCE | 7594192 |
|
|