|
|
|
National Stock Number:
3040-01-245-9456
Federal Supply Class:
3040
National Item Identification Number:
012459456
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 5000230 | 99167 | HAMILTON SUNDSTRAND CORPORATION |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 0.6100 INCHES MINIMUM AND 0.6400 INCHES MAXIMUM | | FIRST END SPLINE MAJOR DIAMETER | 0.4160 INCHES MINIMUM AND 0.4240 INCHES MAXIMUM | | LARGEST STEP DIAMETER | 0.610 INCHES MINIMUM AND 0.640 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | MS10.3 MFR REF SINGLE MATERIAL RESPONSE | | OVERALL LENGTH | 1.567 INCHES MINIMUM AND 1.573 INCHES MAXIMUM | | SECOND END DIAMETER | 0.5520 INCHES MINIMUM AND 0.5720 INCHES MAXIMUM | | SECOND END SPLINE MAJOR DIAMETER | 0.4160 INCHES MINIMUM AND 0.4240 INCHES MAXIMUM | | SPECIAL FEATURES | HAS INTERNAL INVOLUTE SPLINES; FLAT ROOT SIDE-FIT; 12 TEETH; 0.3750 PITCH DIA; 30 DEG PRESSURE ANGLE; PITCH FRACTION 32/64 AGAVGACFT,TYPE B-1B | | STEP QUANTITY | 3 | | SUPPLEMENTARY FEATURES | APPL TO FLIGHT CONTROL | | SURFACE FINISH | 250.0 MICROINCHES |
|
|