|
|
|
National Stock Number:
3040-01-245-4863
Federal Supply Class:
3040
National Item Identification Number:
012454863
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 5000210 | 99167 | HAMILTON SUNDSTRAND CORPORATION |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 0.4730 INCHES NOMINAL | | FIRST END PITCH DIAMETER | 0.3750 INCHES NOMINAL | | FIRST END PRESSURE ANGLE | 30.0 DEGREES NOMINAL | | FIRST END SPLINE LENGTH | 0.626 INCHES NOMINAL | | FIRST END SPLINE MAJOR DIAMETER | 0.4060 INCHES NOMINAL | | FIRST END SPLINE MINOR DIAMETER | 0.3330 INCHES NOMINAL | | FIRST END SPLINE QUANTITY | 12 | | FIRST END STYLE | SPLINED (INVOLUTE) | | LARGEST STEP DIAMETER | 0.562 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS-5643 ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 17-4PH | | OVERALL LENGTH | 3.179 INCHES NOMINAL | | SECOND END DISTANCE FROM END TO GROOVE | 0.359 INCHES NOMINAL | | SECOND END EXTERNAL THREAD LENGTH | 0.359 INCHES NOMINAL | | SECOND END GROOVE DIAMETER | 0.2500 INCHES NOMINAL | | SECOND END GROOVE WIDTH | 0.0940 INCHES NOMINAL | | SECOND END DIAMETER | 0.3750 INCHES NOMINAL | | SECOND END STYLE | CIRCULAR GROOVED AND EXTERNALLY THREADED | | SPECIAL FEATURES | ITEM HAS THRU HOLE 0.078 DIA. 0.203 IN. FROM SECOND END | | STEP QUANTITY | 8 |
|
|