3040-01-245-4718, SHAFT,SHOULDERED

National Stock Number:
3040-01-245-4718

Federal Supply Class:
3040

National Item Identification Number:
012454718

Description:
SHAFT,SHOULDERED

Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.

Manufacturer Information:

3-P-362	11757	PARKER HANNIFIN CORPORATION
3-P-362	U3036	BENSON ENVIRONMENTAL LTD T/A BENSON HEATING

Techincal Specification:

END SIMILARITY	NOT IDENTICAL
FIRST END DISTANCE FROM END TO GROOVE	0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM
FIRST END EXTERNAL THREAD LENGTH	0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM
FIRST END DIAMETER	0.8650 INCHES MINIMUM AND 0.8850 INCHES MAXIMUM
FIRST END GROOVE DIAMETER	0.7400 INCHES MINIMUM AND 0.7600 INCHES MAXIMUM
FIRST END GROOVE WIDTH	0.1150 INCHES MINIMUM AND 0.1350 INCHES MAXIMUM
FIRST END STYLE	CIRCULAR GROOVED AND EXTERNALLY THREADED
LARGEST STEP DIAMETER	1.970 INCHES MINIMUM AND 1.980 INCHES MAXIMUM
MATERIAL	STEEL COMP 8620H
OVERALL LENGTH	10.865 INCHES MINIMUM AND 10.885 INCHES MAXIMUM
SPECIAL FEATURES	8 CIRCULAR GROOVES
SECOND END DISTANCE FROM END TO GROOVE	1.022 INCHES MINIMUM AND 1.042 INCHES MAXIMUM
SECOND END GROOVE DIAMETER	1.5216 INCHES MINIMUM AND 1.5221 INCHES MAXIMUM
SECOND END GROOVE WIDTH	0.0840 INCHES MINIMUM AND 0.0860 INCHES MAXIMUM
SECOND END DIAMETER	1.9700 INCHES MINIMUM AND 1.9800 INCHES MAXIMUM
SECOND END SPLINE MAJOR DIAMETER	1.7716 INCHES MINIMUM AND 1.7721 INCHES MAXIMUM
SECOND END SPLINE MINOR DIAMETER	1.7900 INCHES MINIMUM AND 1.8000 INCHES MAXIMUM
SECOND END SPLINE QUANTITY	10
SECOND END STYLE	CIRCULAR GROOVED AND SPLINED (STRAIGHT)
SECOND END SPLINE LENGTH	0.960 INCHES MINIMUM AND 0.980 INCHES MAXIMUM
STEP QUANTITY	6

Click here to Register for Free 30-day Trial