|
|
|
National Stock Number:
3040-01-242-6136
Federal Supply Class:
3040
National Item Identification Number:
012426136
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 778-1391-001 | 13499 | ROCKWELL COLLINS, INC. |
|
Techincal Specification:
| END SIMILARITY | IDENTICAL | | FIRST END DIAMETER | 0.0395 INCHES MINIMUM AND 0.0398 INCHES MAXIMUM | | FIRST END STYLE | PLAIN | | LARGEST STEP DIAMETER | 0.0611 INCHES MINIMUM AND 0.0615 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-B-626,COMP 22,TEMP 1/2 HARD FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | COPPER ALLOY | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL LENGTH | 1.315 INCHES MINIMUM AND 1.331 INCHES MAXIMUM | | SECOND END DIAMETER | 0.0611 INCHES MINIMUM AND 0.0615 INCHES MAXIMUM | | SECOND END STYLE | PLAIN | | STEP QUANTITY | 1 |
|
|