|
|
|
National Stock Number:
3040-01-238-9687
Federal Supply Class:
3040
National Item Identification Number:
012389687
Description:
COLLAR,SHAFT
Detail:
An item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.
|
Manufacturer Information:
| 5830120 | 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER |
|
Techincal Specification:
| ANGLE BETWEEN CENTERLINES OF SECURING HOLES IN DEG | 180.0 | | BORE DIAMETER | 0.3270 INCHES NOMINAL | | HOLE DIAMETER AND LOCATION | 0.1350 INCHES MINIMUM ALL HOLES AND 0.1410 INCHES MAXIMUM ALL HOLES | | OUTSIDE DIAMETER | 0.500 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | FED STD 66 FED STD SINGLE MATERIAL RESPONSE OR AISI 1010 ASSN STD SINGLE MATERIAL RESPONSE OR SAE 1010 ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 1010 | | SECURING HOLE QUANTITY | 2 | | SECURING HOLE TYPE AND LOCATION | UNTHREADED ALL HOLES | | STYLE DESIGNATOR | ROUND W/SINGLE CHAMFER | | SURFACE TREATMENT | PHOSPHATE | | THICKNESS | 0.460 INCHES NOMINAL |
|
|