|
|
|
National Stock Number:
3040-01-237-8338
Federal Supply Class:
3040
National Item Identification Number:
012378338
Description:
SHAFT,STRAIGHT
Detail:
A straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for jubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.
|
Manufacturer Information:
| 77832-60X28 | 96169 | ELECTRIC BOAT CORPORATION | | 77832-60X28 PIECE 6 | 96169 | ELECTRIC BOAT CORPORATION | | SSN637-709-2481703 | 80064 | NAVAL SHIP SYSTEMS COMMAND | | SSN637-709-2481703 PIECE 6 | 80064 | NAVAL SHIP SYSTEMS COMMAND |
|
Techincal Specification:
| END SIMILARITY | IDENTICAL | | FIRST END DIAMETER | 0.8720 INCHES MINIMUM AND 0.8730 INCHES MAXIMUM | | FIRST END HOLE DIAMETER | 0.2660 INCHES NOMINAL | | FIRST END SPLINE QUANTITY | 10 | | FIRST END STYLE | CROSS DRILLED HOLE AND SPLINED (STRAIGHT) | | FIRST END SPLINE LENGTH | 1.6250 INCHES NOMINAL | | FIRST END SPLINE MAJOR DIAMETER | 0.8720 INCHES MINIMUM AND 0.8730 INCHES MAXIMUM | | FIRST END SPLINE MINOR DIAMETER | 0.7420 INCHES MINIMUM AND 0.7470 INCHES MAXIMUM | | OVERALL LENGTH | 22.875 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | NICKEL ALLOY |
|
|