|
|
|
National Stock Number:
3040-01-237-6287
Federal Supply Class:
3040
National Item Identification Number:
012376287
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 441 265 01 04 | 64678 | DAIMLER TRUCK NORTH AMERICA LLC | | 441 265 01 04 | CN7Z7 | MERCEDES-BENZ AG | | 441 265 01 04 | D8046 | DAIMLER AG |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 648.0 MILLIMETERS NOMINAL | | FIRST END DISTANCE FROM HOLE CENTER TO END | 5.0 MILLIMETERS NOMINAL | | FIRST END HOLE DIAMETER | 2.0 MILLIMETERS NOMINAL | | FIRST END STYLE | UNTHREADED CROSS DRILLED | | LARGEST STEP DIAMETER | 104.0 MILLIMETERS NOMINAL | | MATERIAL | STEEL | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL LENGTH | 246.0 MILLIMETERS NOMINAL | | SECOND END DIAMETER | 18.5 MILLIMETERS NOMINAL | | SECOND END DISTANCE FROM END TO FLAT | 30.0 MILLIMETERS NOMINAL | | SECOND END GROOVED FLAT DEPTH | 10.1 MILLIMETERS NOMINAL | | SECOND END GROOVED FLAT LENGTH | 10.0 MILLIMETERS NOMINAL | | SECOND END STYLE | SLOTTED AND FLAT GROOVED | | SECOND END SLOT DEPTH | 6.0 MILLIMETERS NOMINAL | | SECOND END SLOT WIDTH | 3.0 MILLIMETERS NOMINAL | | STEP QUANTITY | 5 |
|
|